Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

K-Type Probe Thermocouple 11cm

ID: TMP4106_0

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.

$16.00

Quantity Available: 299

Qty Price
5 $15.36
10 $14.72
25 $14.40
50 $14.08
100 $13.76
50+...

Measure -40 to 400°C with this stainless steel K-type thermocouple probe. Since the end of the thermocouple is enclosed, it is ideal for measuring liquids. The thermocouple junction is ungrounded, meaning it is isolated from the outer sheath and more resistant to environmental noise. You can read it using a Phidgets thermocouple interface.

Note: Beyond the 11cm tip, this thermocouple is not waterproof.

Features

  • Measure -40 to 400 degrees Celsius
  • K-type ungrounded thermocouple
  • 11 cm stainless steel probe

If you need to fix it to a panel or mount it inside an enclosure, have a look at the HDW4100 - 1/8" Mounting Nut or the HDW4101 - M12 Mounting Nut.

For more information on thermocouples, visit the Thermocouple Guide.

Thermocouple Interfaces

This K-type thermocouple can be read by connecting it to any of the thermocouple interfaces in the list below.

Note: On the 1051 or TMP1100, connect the black thermocouple wire to the (-) terminal block and the red wire to the (+) terminal block.
On the 1048 or TMP1101, connect the black wire to G and the red wire to input terminal block (numbered 0 to 3).

Function TMP4106
Thermocouple
Thermocouple
Interface
+ Red + / #
- Black - / G
Functional

Thermocouple Accessories

Thermocouples cannot easily be soldered, since adding an additional metal junction will throw off the readings. The following products will help connect or extend thermocouple wires.

Mounting Nuts

This probe thermocouple can be quickly and easily mounted into the side of a panel or enclosure using a mounting nut. The end is threaded so it can be fastened in place with a nut and washer.

Product Specifications

Sensor Properties
Sensor Type Thermocouple
Temperature Sensor
Thermocouple Type K
Probe Type Immersion (Ungrounded)
Ambient Temperature Min -40 °C
Ambient Temperature Max 400 °C
Ambient Temperature Min (Momentary) -40 °C
Ambient Temperature Max (Momentary) 1000 °C
Ambient Temperature Error Max 3.3 °C
Physical Properties
Cable Length 1 m
Probe Diameter 3.2 mm
Cable Diameter 3 mm
Probe Material Stainless Steel
Customs Information
Canadian HS Export Code 9025.19.00
American HTS Import Code 9025.19.80.85
Country of Origin CN (China)

Check out our thermocouples:

Product Temperature Sensor
Part Number Price Thermocouple Type Ambient Temperature Min Ambient Temperature Max Ambient Temperature Error Max
TMP4104_0
K-Type Fiberglass Bead Probe Thermocouple
$10.00 K -40 °C 400 °C ± 0.75 °C
TMP4106_0
K-Type Probe Thermocouple 11cm
$16.00 K -40 °C 400 °C 3.3 °C
TMP4107_0
K-Type Probe Thermocouple 20cm
$16.00 K -40 °C 400 °C 3.3 °C
TMP4111_0
K-Type Probe Thermocouple 30cm
$20.00 K -40 °C 400 °C 3.3 °C
TMP4103_0
K-Type Teflon Bead Probe Thermocouple (-40°C to +200°C)
$5.00 K -40 °C 200 °C ± 0.75 °C