Controllers

This VINT Hub has six high-speed VINT ports and is ideal for new Phidget systems.

This VINT Hub has a single high-speed VINT port and is great for systems with limited space.

This VINT Hub has six VINT ports, including three that are high speed.

This VINT Hub has six VINT ports and connects to a network via WiFi or Ethernet.

This single-board computer running Debian is ideal for standalone Phidget systems. It features a built-in six port VINT Hub.

With eight analog ports, you can connect a bunch of 5V sensors or measure small voltage signals.

Add 4 digital inputs to your VINT Hub. These inputs have a shorter trigger time than a VINT port in Digital Input mode.

Add 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.

Add 16 isolated active-high digital inputs to your hub at the cost of only one VINT port.

Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply.

Control one high-current brushed DC motor with this powerful Phidget. Has an encoder input and analog input for feedback control.

Control a single DC motor up to 4A with this compact and affordable Phidget. Connects to a VINT port.

Control two DC motors from one VINT port with this compact motor controller.

Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control.

Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.

Control the current, voltage and brightness of 32 LEDs from a VINT port with this externally powered module.

Produce a voltage from 0 to 4.2 volts with this simple voltage output module.

Produce a voltage from -10 to +10 volts with this isolated voltage output module.

Produce a voltage from -10 to +10 volts with this 16-bit isolated voltage output module.

Add four 5V PWM-enabled digital outputs to your hub with this simple and affordable module.

This wall socket makes it easy for your VINT Hub to switch power to a device or appliance.

Control position, velocity, and acceleration of 16 RC servos with just one VINT port.

Switch the power of up to four circuits at 210W of DC power or 1750 VA of AC power with this mechanical relay module.

Add four PWM-enabled solid state relay outputs to your hub with this module. This board is isolated to prevent ground loops.

Add 16 PWM-enabled solid state relay outputs to your hub. This module is isolated from input to output.

Control the position, velocity, and acceleration of one high-power stepper motor with this Phidget.

This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.

Measure up to ±40V with this high precision isolated voltage input Phidget. Connects to a VINT port.

This Phidget measures voltage potentials of up to ±40V. It connects to a VINT port and is isolated for increased reliability.

Measure tiny voltage differences of up to ±1V with precision. This Phidget is isolated and plugs into a VINT port.

Control up to 8 RC servo motors or actuators with this controller board. Connects to your computer via USB.

Outputs a voltage from -10V to +10V.

The ideal product for OEMs and Systems Integrators. The small DIP-36 package will plug right into your own designed board.

Small Dongle with 2 Analog Inputs, 2 Digital Inputs and 2 Digital Outputs. Use it when space is critical.

Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs.

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

This board has 4 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs.

The Phidgets workhorse. Connect sensors, control outputs, and read in digital inputs.

A 1018 with an on-board powered 6-port full-speed (12Mbit/s) USB hub.

Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols.

This Phidget uses current control to adjust the brightness of up to 64 LEDs.

Send and receive IR data with this Phidget. It can learn and reproduce signals from common devices like your TV remote.

Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.

Control one motor as well as an encoder and up to 2 analog and 2 digital sensors. Connects to a USB port.

Control one RC servo motor or actuator with this controller board. Powered solely by your computer via USB.

Accurately control one bipolar stepper motor with this controller. This board comes with a number of safety features.

A Phidget InterfaceKit with a 2-line by 20-character White Backlit LCD Display.

A dual channel LCD controller that is compatible with HD44780 LCD modules.

Use a VINT port with this relay to switch power to a circuit running at up to 210 watts DC or 1750 volt-amperes AC.

Switch a small digital signal with this DPDT mechanical relay Phidget. Switch up to 60W of DC power or 125 VA of AC power.

This solid state relay module can switch up to 30V and 10A AC or DC using a port on your VINT Hub.

This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

Rated for 28VAC/2.5amp or 40VDC/2.5amp switching, this SSR is controlled by a digital output.

Switch 2 SSRs rated for 28VAC/9amp or 40VDC/9amp using digital outputs.

Rated for 28VAC/0.5amp or 40VDC/0.5amp switching, this SSR is controlled by a digital output.

This adapter cable will allow you to connect serial devices to the SBC's USB port.

A 2 line by 20 character backlit LCD display. Each character is 3.2x5.55mm.

A 2 line by 20 character backlit LCD display. Each character is 5.9x12.7mm.

A 2 line by 40 character backlit LCD display. Each character is 3.2x5.55mm.

A 4 line by 20 character backlit LCD display. Each character is 2.95x4.75mm.

A 4 line by 40 character backlit LCD display. Each character is 2.78x4.89mm.

This tiny wireless adapter will enable your SBC4 to connect to your home wi-fi network.

This SSR switches up to 30VDC/50amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

This SSR switches up to 50VDC/80amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

This SSR switches up to 30VDC/100amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

This SSR switches up to 280VAC / 20A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

Use this heatsink to run one SSR at full current switching capacity without overheating.

This SSR switches up to 120VDC / 75A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

Use this heatsink to run one high current SSR without overheating.

This SSR switches up to 280VAC / 20A and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.

Two meter CAT5E cable for use with Phidget SBCs.

This wireless adapter will enable your SBC4 to connect to your home wi-fi network.

This 720p USB webcam is ideal for use with your Phidget SBC.

An adapter dongle for the SBC that enables audio input and output.

This adapter cable will allow you to connect serial devices to the SBC's USB port.