Mechanical

Precision chrome plated, case hardened linear shaft. Hollow profile is stiffer & lighter than solid shaft.

Precision chrome plated, case hardened linear shaft, mounted to an aluminum rail which prevents flexing under load.

Precision chrome plated, case hardened linear shaft, mounted to an aluminum rail which prevents flexing under load.

Precision chrome plated, case hardened linear shaft, mounted to an aluminum rail which prevents flexing under load.

Precision chrome plated, case hardened linear shaft.

Precision chrome plated, case hardened linear shaft.

Precision chrome plated, case hardened linear shaft.

Precision chrome plated, case hardened linear shaft.

Adapter for ball nuts that allows connection to parallel surfaces.

Adapter for ball nuts that allows connection to parallel surfaces.

Adapter for ball nuts that allows connection to parallel surfaces.

Bearing support for the drive end of a ball screw.

Bearing support for the drive end of a ball screw.

Bearing support for the drive end of a ball screw.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Allows for precise linear positioning. Comes with a threaded nut for connections and mounting.

Bearing support for the drive end of a ball screw.

Bearing support for the drive end of a ball screw.

Bearing support for the drive end of a ball screw.

This bearing for an 12mm linear shaft provides a sliding right-angle mounting point.

This bearing for an 16mm linear shaft provides a sliding right-angle mounting point.

This bearing for an 25mm linear shaft provides a sliding right-angle mounting point.

This bearing for an 8mm linear shaft provides a sliding right-angle mounting point.

This bearing for a 12mm linear rail provides a sliding mounting point.

This bearing for a 12mm linear shaft provides a sliding mounting point.

This bearing for a 16mm linear rail provides a sliding mounting point.

This bearing for a 16mm linear shaft provides a sliding mounting point.

This bearing for a 25mm linear rail provides a sliding mounting point.

This bearing for a 25mm linear shaft provides a sliding mounting point.

This bearing for an 8mm linear shaft provides a sliding mounting point.

This bearing for an 12mm linear shaft can be press-fit into another part to allow that part to slide along the shaft.

This bearing for an 16mm linear shaft can be press-fit into another part to allow that part to slide along the shaft.

This bearing for an 25mm linear shaft can be press-fit into another part to allow that part to slide along the shaft.

This bearing for an 8mm linear shaft can be press-fit into another part to allow that part to slide along the shaft.

This compact bipolar stepper with a rear shaft and a gearbox has a 0.067° step angle and 14 kg·cm of torque at low speeds.

This compact bipolar stepper with a rear shaft and a gearbox has a 0.018° step angle and 32 kg·cm of torque at low speeds.

This tiny stepper with a rear shaft has a 1.8° step angle and 520 g·cm of torque at low speeds.

This bipolar stepper with rear shaft has a 1.8° step angle and 1.2 kg·cm of torque at low speeds.

This precision bipolar stepper with rear shaft has a 0.9° step angle and 3.3 kg·cm of torque at low speeds.

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.35° step angle and 18 kg·cm of torque at low speeds.

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.018° step angle and 48 kg·cm of torque at low speeds.

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.13° step angle and 30 kg·cm of torque at low speeds.

This bipolar stepper with gearbox and rear shaft has a 0.067° step angle and 30 kg·cm of torque at low speeds.

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.035° step angle and 48 kg·cm of torque at low speeds.

This affordable bipolar stepper with a rear shaft has a 1.8° step angle and 3.3 kg·cm of torque at low speeds.

This precision bipolar stepper with rear shaft has a 0.9° step angle and 11.2 kg·cm of torque at low speeds.

This powerful bipolar stepper with a rear shaft and a gearbox has a 0.12° step angle and 150 kg·cm of torque at low speeds.

This bipolar stepper with a rear shaft and a planetary gearbox has a 0.42° step angle and 46.6 kg·cm of torque at low speeds.

This powerful bipolar stepper with a rear shaft and a gearbox has a 0.023° step angle and 240 kg·cm of torque at low speeds.

This huge bipolar stepper with a rear shaft has a 1.8° step angle and 30 kg·cm of torque at low speeds.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.

Stationary support for linear shaft. Mounts at right angle and tightens via set screw.

Stationary support for linear shaft. Mounts at right angle and tightens via set screw.

Stationary support for linear shaft. Mounts at right angle and tightens via set screw.

Stationary support for linear shaft. Mounts at right angle and tightens via set screw.

This aluminium beam coupling connects two 4mm shafts together with set screws

This aluminium beam coupling connects two 5mm shafts together with set screws.

This aluminum beam coupling connects two 5mm shafts together with set screws

This aluminum beam coupling connects two 8mm shafts together with set screws

This DC motor has a 10:1 gearbox, a rated speed of 230 RPM and rated torque of 0.2 Kg·cm.

This DC motor has a 18:1 gearbox, a rated speed of 127 RPM and rated torque of 0.31 Kg·cm.

This DC motor has a 50:1 gearbox, a rated speed of 46 RPM and rated torque of 0.82 Kg·cm.

This DC motor has a 100:1 gearbox, a rated speed of 23 RPM and rated torque of 1.63 Kg·cm.

Free spinning pulley for tensioning.

Free spinning pulley for tensioning.

Free spinning pulley for tensioning.

This compact servo motor has 180° of travel and is an economical choice for small projects.

This servo motor has 180° of travel and reasonable torque for its size.

This kit contains everything you need to get started building with PG20 T-Slot.

This kit contains everything you need to get started building with PG30 T-Slot.

This kit contains everything you need to get started building with PG40 T-Slot.

This DC motor has a 3.7:1 gearbox, a rated speed of 1080 RPM and rated torque of 0.24 Kg·cm.

This DC motor has a 14:1 gearbox, a rated speed of 285 RPM and rated torque of 0.9 Kg·cm.

This DC motor has a 51:1 gearbox, a rated speed of 78 RPM and rated torque of 3.06 Kg·cm.

For applications where a finite range of motion is not acceptable, use this continuous rotation servo.

With over 19 kg·cm of torque and 180° of travel, this heavy duty servo is made for strong, slow movements.

This servo motor has 180° of travel and has a durable metal gear train.

This winch servo has 8 revolutions of travel and a drum wheel for applications that require something to be reeled in.

This is the base component for the T-Slot system. Build it into a structure using PG20 hardware.

This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG20 items.

This is the base component for the T-Slot system. Build it into a structure using PG30 hardware.

This is the base component for the T-Slot system. Build it into a structure using PG40 hardware.

This DC motor has a 3.7:1 gearbox, a rated speed of 670 RPM and rated torque of 0.54 Kg·cm.

This DC motor has a 14:1 gearbox, a rated speed of 175 RPM and rated torque of 1.94 Kg·cm.

This DC motor has a 51:1 gearbox, a rated speed of 49 RPM and rated torque of 6.63 Kg·cm.

This DC motor has a 51:1 gearbox, a rated speed of 49 RPM and rated torque of 6.63 Kg·cm.

The baseline SpringRC model, this affordable servo has 180° of travel and 3.5 kg·cm of torque.

This DC motor has a 139:1 gearbox, a rated speed of 18 RPM and rated torque of 17.3 Kg·cm.

This DC motor has a 13:1 gearbox, a rated speed of 192 RPM and rated torque of 14.3 Kg·cm.

This DC motor has a 168:1 gearbox, a rated speed of 15 RPM and rated torque of 173 Kg·cm.

This DC motor has a 4.25:1 gearbox, a rated speed of 588 RPM and rated torque of 5.1 Kg·cm.

This DC motor has a 47:1 gearbox, a rated speed of 53 RPM and rated torque of 51 Kg·cm.

This DC motor has a 76:1 gearbox, a rated speed of 33 RPM and rated torque of 82.6 Kg·cm.

A modular, stackable aluminium plate with mounting holes to match most Phidgets.

This servo has 180° of travel and has good torque for its size.

This DC motor has a rated speed of 772 RPM and a rated torque of 10.6 kg-cm.

This DC motor has a rated speed of 50 RPM and a rated torque of 162 kg-cm.

This DC motor has a rated speed of 182 RPM and a rated torque of 45 kg-cm.

High carbon steel shaft for rotary power transmission.

Bearing support for 8mm rotary shaft.

This powerful continuous rotation servo has 12 kg·cm of torque, making it a versatile choice.

Free spinning sprocket for tensioning.

Free spinning sprocket for tensioning.

Free spinning sprocket for tensioning.

Free spinning sprocket for tensioning.

High carbon steel shaft for rotary power transmission.

High carbon steel shaft with machined keyway for rotary power transmission.

This DC motor has an encoder, a 3.7:1 gearbox, a rated speed of 1080 RPM and rated torque of 0.24 Kg·cm.

This after market gear box adapts your motor for high torque, low speed applications.

High carbon steel shaft for rotary power transmission.

High carbon steel shaft with machined keyway for rotary power transmission.

This screw terminal clips onto EN50022 DIN rail. Recommended for 18 to 1/0 AWG wire.

This screw terminal clips onto EN50022 DIN rail. Recommended for 20 to 6 AWG wire.

This after market gear box adapts your motor for high torque, low speed applications.

This after market gear box adapts your motor for high torque, low speed applications.

This screw terminal clips onto EN50022 DIN rail. Recommended for 24 to 12 AWG wire.

This DC motor has a rated speed of 3280 RPM and a rated torque of 2.5 kg-cm.

This gearless DC motor has a rated speed of 3000 RPM and a rated torque of 4.3 kg-cm.

This gearless DC motor has a rated speed of 3200 RPM and a rated torque of 6 kg-cm.

High carbon steel shaft for rotary power transmission.

High carbon steel shaft with machined keyway for rotary power transmission.

Rail standard for mounting electrical equipment.

This after market gear box adapts your motor for high torque, low speed applications.

This after market gear box adapts your motor for high torque, low speed applications.

This after market gear box adapts your motor for high torque, low speed applications.

This anchor connects two PG30 T-Slot profiles together. Swivels to allow for non-right angle connections.

This anchor connects two PG40 T-Slot profiles together. Swivels to allow for non-right angle connections.

This bracket reinforces a 90° joint between two PG20 profiles.

This bracket reinforces a 90° joint between two PG30 profiles.

This bracket reinforces a 90° joint between two PG30 profiles. The extra length provides better strength.

This bracket reinforces a 90° joint between two double-wide PG30 profiles.

This bracket reinforces a 90° joint between two PG40 profiles.

This bracket reinforces a 90° joint between two PG40 profiles. The extra length provides better strength.

This bracket reinforces a 90° joint between two double-wide PG40 profiles.

This is the strongest method for connecting two PG30 extrusions at right angles.

This is the strongest method for connecting two PG40 extrusions at right angles.

Cleanly connect three PG30 profiles at a cubic right angle corner.

Cleanly connect three PG40 profiles at a cubic right angle corner.

This DC actuator has a stroke length of 30mm with a peak force of 18 N and a peak speed of 50 mm/s.

This DC actuator has a stroke length of 30mm with a peak force of 60N and a peak speed of 15 mm/s.

Cap off the end of your PG20 T-Slot profile.

Cap off the end of your double-width PG20 T-Slot profile.

Cap off the end of your PG30 T-Slot profile.

Cap off the end of your double-width PG30 T-Slot profile.

Cap off the end of your PG40 T-Slot profile.

Cap off the end of your double-width PG40 T-Slot profile.

Bearing support for 12mm rotary shaft.

Bearing support for 17mm rotary shaft.

Bearing support for 25mm rotary shaft.

Mount wheels or feet to the end of your PG40 profile with this plate.

Mount wheels or feet to the end of your double-width PG40 profile with this plate.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG30 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG30 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG40 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG40 profiles at right angles by sliding this bracket into the groove of the profile.

This aluminium jaw coupling fits a 0.25" shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 0.5" shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 10mm shaft and connects to another half coupling with a spider. It has a 3mm keyway and comes with a key.

This aluminium jaw coupling fits a 10mm shaft and connects to another half coupling with a spider. It has a 4mm keyway and comes with a key.

This aluminium jaw coupling fits a 11mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 12mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 12mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 14mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 17mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 17mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 19mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 19mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 24mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 24mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 25mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 25mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 35mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 4mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 5/8" shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 5mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 6mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 8mm shaft and connects to another half coupling with a spider.

This aluminium jaw coupling fits a 9mm shaft and connects to another half coupling with a spider.

Strengthens right angle joints.

Strengthens T joints.

Join two PG20 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Join two PG30 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Join two PG40 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Fix a NEMA-11 sized motor or 28mm gearbox to a flat surface with this steel mounting bracket.

Fix a NEMA-17 sized motor or 36mm gearbox to a flat surface with this steel mounting bracket.

Fix a NEMA-23 sized motor or 56mm gearbox to a flat surface with this steel mounting bracket.

This compact, affordable 8-pole BLDC motor can output 1.3kg-cm of torque at speeds of up to 4000 RPM.

Bearing support for 8mm rotary shaft.

M4 nut for bolting flat along PG20 T-Slot profiles.

M5 nut for bolting flat along PG20 T-Slot profiles.

M5 nut for bolting flat along PG30 T-Slot profiles.

M6 nut for bolting flat along PG30 T-Slot profiles.

M5 nut for bolting flat along PG40 T-Slot profiles.

M6 nut for bolting flat along PG40 T-Slot profiles.

M8 nut for bolting flat along PG40 T-Slot profiles.

Put your PG40 T-Slot structure on wheels for controlled mobility.

The simplest 90° connection for PG20 profiles.

The simplest 90° connection for PG30 profiles.

The simplest 90° connection for PG40 profiles.

Provide your PG40 T-Slot structure with feet to provide good traction. Adjustable height and pivots for uneven surfaces.

M5 nut for bolting flat along PG30 T-Slot profiles. Good for large projects that need many connection points.

M6 nut for bolting flat along PG30 T-Slot profiles. Good for large projects that need many connection points.

M5 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

M6 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

M8 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

Put your PG40 T-Slot structure on wheels to allow for easy mobility.

M5 nut for bolting flat along PG30 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

Use these covers to give a cleaner look to your PG20 T-Slot profiles whose slots aren't being used.

Use these covers to give a cleaner look to your PG30 T-Slot profiles whose slots aren't being used.

Use these covers to give a cleaner look to your PG40 T-Slot profiles whose slots aren't being used.

This insert reduces the slot size and adds a soft surface for mounting panels into PG30 T-Slot profiles.

This insert reduces the slot size and adds a soft surface for mounting panels into PG40 T-Slot profiles.

M4 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

M6 nut for bolting flat along PG30 T-Slot profiles when the ends are no longer accessible.

M6 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

M8 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

Extends or joins chain together into loops.

Extends or joins chain together into loops.

This double ended gearshaft allows you to mount something on either end of a series 30 worm gearbox.

This double ended gearshaft allows you to mount something on either end of a series 40 worm gearbox.

This double ended gearshaft allows you to mount something on either end of a series 50 worm gearbox.

This double ended gearshaft allows you to mount something on either end of a series 63 worm gearbox.

This double ended gearshaft allows you to mount something on either end of a series 75 worm gearbox.

This double ended gearshaft allows you to mount something on either end of a series 90 worm gearbox.

This DC actuator has a stroke length of 100mm with a peak force of 18 N and a peak speed of 50 mm/s.

This DC actuator has a stroke length of 100mm with a peak force of 60N and a peak speed of 15 mm/s.

Use this elastomer coupling spider to connect two jaw half-couplings.

Use this elastomer coupling spider to connect two jaw half-couplings.

Use this elastomer coupling spider to connect two jaw half-couplings.

This 8-pole BLDC gear motor can output 5.6kg-cm of torque at speeds of up to 810 RPM.

Bearing support for 12mm rotary shaft.

Bearing support for 17mm rotary shaft.

Bearing support for 25mm rotary shaft.

This DC actuator has a stroke length of 50mm with a peak force of 50N and a peak speed of 32 mm/s.

This DC actuator has a stroke length of 50mm with a peak force of 75N and a peak speed of 20 mm/s.

Clamping plate for mounting timing belts.

Clamping plate for mounting timing belts.

This 8-pole BLDC gear motor can output 15.3kg-cm of torque at speeds of up to 260 RPM.

This 8-pole BLDC gear motor can output 24.5kg-cm of torque at speeds of up to 166 RPM.

This 8-pole BLDC gear motor can output 51 kg-cm of torque at speeds of up to 70 RPM.

This DC actuator has a stroke length of 50mm with a peak force of 175N and a peak speed of 8 mm/s.

This 8-pole BLDC gear motor has a 5mm rear shaft and can output 193.7 kg-cm of torque at speeds of up to 38 RPM.

This powerful 4-pole BLDC motor can output 2.8kg-cm of torque at speeds of up to 4000 RPM.

This powerful 4-pole BLDC motor can output 5kg-cm of torque at speeds of up to 4000 RPM.

This DC actuator has a stroke length of 100mm with a peak force of 50N and a peak speed of 32 mm/s.

This DC actuator has a stroke length of 100mm with a peak force of 75N and a peak speed of 20 mm/s.

This 4-pole BLDC gear motor has a 5mm rear shaft and can output 12.2kg-cm of torque at speeds of up to 930 RPM.

This DC actuator has a stroke length of 100mm with a peak force of 175N and a peak speed of 8 mm/s.

This DC actuator has a stroke length of 140mm with a peak force of 50N and a peak speed of 32 mm/s.

This DC actuator has a stroke length of 140mm with a peak force of 75N and a peak speed of 20 mm/s.

This 4-pole BLDC gear motor can output 37.7kg-cm of torque at speeds of up to 250 RPM.

This 4-pole BLDC gear motor can output 57.1kg-cm of torque at speeds of up to 170 RPM.

This 4-pole BLDC gear motor can output 102kg-cm of torque at speeds of up to 82 RPM.

This 4-pole BLDC gear motor can output 214kg-cm of torque at speeds of up to 41 RPM.

This DC actuator has a stroke length of 140mm with a peak force of 175N and a peak speed of 8 mm/s.

This high speed unipolar stepper has an 18° step angle and 30 g·cm of torque at low speeds.

This servo actuator has a stroke length of 100mm with a peak force of 23N and a peak speed of 12 mm/s.

This servo actuator has a stroke length of 50mm with a peak force of 23N and a peak speed of 12 mm/s.