T-Slot

This kit contains everything you need to get started building with PG20 T-Slot.

This kit contains everything you need to get started building with PG30 T-Slot.

This kit contains everything you need to get started building with PG40 T-Slot.

This is the base component for the T-Slot system. Build it into a structure using PG20 hardware.

This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG20 items.

This is the base component for the T-Slot system. Build it into a structure using PG30 hardware.

This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG30 items.

This is the base component for the T-Slot system. Build it into a structure using PG40 hardware.

This anchor connects two PG30 T-Slot profiles together. Swivels to allow for non-right angle connections.

This anchor connects two PG40 T-Slot profiles together. Swivels to allow for non-right angle connections.

This bracket reinforces a 90° joint between two PG20 profiles.

This bracket reinforces a 90° joint between two PG30 profiles.

This bracket reinforces a 90° joint between two PG30 profiles. The extra length provides better strength.

This bracket reinforces a 90° joint between two double-wide PG30 profiles.

This bracket reinforces a 90° joint between two PG40 profiles.

This bracket reinforces a 90° joint between two PG40 profiles. The extra length provides better strength.

This bracket reinforces a 90° joint between two double-wide PG40 profiles.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG30 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG30 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG40 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG40 profiles at right angles by sliding these brackets into the groove of the profile.

Join two PG20 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Join two PG30 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Join two PG40 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

Strengthens right angle joints.

Strengthens T joints.

This is the strongest method for connecting two PG30 extrusions at right angles.

This is the strongest method for connecting two PG40 extrusions at right angles.

Cleanly connect three PG30 profiles at a cubic right angle corner.

Cleanly connect three PG40 profiles at a cubic right angle corner.

Mount wheels or feet to the end of your PG40 profile with this plate.

Mount wheels or feet to the end of your double-width PG40 profile with this plate.

M4 nut for bolting flat along PG20 T-Slot profiles.

M5 nut for bolting flat along PG20 T-Slot profiles.

M5 nut for bolting flat along PG30 T-Slot profiles.

M6 nut for bolting flat along PG30 T-Slot profiles.

M5 nut for bolting flat along PG40 T-Slot profiles.

M6 nut for bolting flat along PG40 T-Slot profiles.

M8 nut for bolting flat along PG40 T-Slot profiles.

M4 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG30 T-Slot profiles when the ends are no longer accessible.

M6 nut for bolting flat along PG30 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

M6 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

M8 nut for bolting flat along PG40 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG30 T-Slot profiles. Good for large projects that need many connection points.

M6 nut for bolting flat along PG30 T-Slot profiles. Good for large projects that need many connection points.

M5 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

M6 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

M8 nut for bolting flat along PG40 T-Slot profiles. Good for large projects that need many connection points.

The simplest 90° connection for PG20 profiles.

The simplest 90° connection for PG30 profiles.

The simplest 90° connection for PG40 profiles.

Cap off the end of your PG20 T-Slot profile.

Cap off the end of your double-width PG20 T-Slot profile.

Cap off the end of your PG30 T-Slot profile.

Cap off the end of your double-width PG30 T-Slot profile.

Cap off the end of your PG40 T-Slot profile.

Cap off the end of your double-width PG40 T-Slot profile.

Use these covers to give a cleaner look to your PG20 T-Slot profiles whose slots aren't being used.

Use these covers to give a cleaner look to your PG30 T-Slot profiles whose slots aren't being used.

Use these covers to give a cleaner look to your PG40 T-Slot profiles whose slots aren't being used.

Put your PG40 T-Slot structure on wheels to allow for easy mobility.

Put your PG40 T-Slot structure on wheels for controlled mobility.

Provide your PG40 T-Slot structure with feet to provide good traction. Adjustable height and pivots for uneven surfaces.

This insert reduces the slot size and adds a soft surface for mounting panels into PG30 T-Slot profiles.

This insert reduces the slot size and adds a soft surface for mounting panels into PG40 T-Slot profiles.