Sensors

Measure distances up to 1300mm with this infrared time-of-flight sensor. Connects to a VINT port.

This load cell interface has four inputs and a maximum data rate of 1200 Hz.

This spatial board has a 3-axis accelerometer, gyroscope and compass with high resolution readings at low magnitudes.

This encoder interface can measure 100,000 quadrature cycles per second at 50 Hz.

Measure tiny voltage differences of up to ±1V with precision. This Phidget is isolated and plugs into a VINT port.

This Phidget measures voltage potentials of up to ±40V. It connects to a VINT port and is isolated for increased reliability.

Measure up to ±40V with this high precision isolated voltage input Phidget. Connects to a VINT port.

Measure in-line DC current flow of up to 30A with this Phidget that connects to a VINT port.

Connect up to four K, J, E or T type thermocouples to this Phidget to measure the temperature of the air or an object.

Precisely measure the absolute air pressures between 50 and 110 kPa with this barometer that connects to any VINT port.

This dial has a fully continuous range of motion and a center pushbutton. Connects to a VINT port.

Measure distances up to 650mm with this infrared time-of-flight sensor. Connects to a VINT port.

Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C.

Connect one K, J, E or T type thermocouple to this Phidget to measure the temperature of the air, an object, or a liquid.

This light sensor measures from 188 μlux to 220 klux and connects to any VINT port.

Sensing changes in IR light, this sensor detects movement in a small room or hallway and connects to an analog input.

Connect a pH probe or any voltage-based probe that uses a BNC connector to your VINT port with this isolated adapter.

Measure acceleration up to ±8g in each axis with the PhidgetAccelerometer. Connects via USB or VINT.

Read up to four thermocouples via USB with this board to measure the temperature of four different objects.

Measure RTDs, thermistors, and other resistance-based sensors with this VINT port adapter.

Measure RTDs, thermistors, and other resistance-based sensors with this VINT port adapter.

Measure soil moisture to bring some automation to your next gardening project.

Detect several solid objects up to 10m away in a wide sensing range, or use this Phidget as an ultrasonic range finder.

Measure sound from 34 to 102 dB (SPL). Supports A and C weightings, and can split data into distinct frequency bands.

An accelerometer, gyroscope, and magnetometer all in one board. Measuring in 3 axes, it plugs right into your VINT hub.

Make a custom controller for your project with this thumbstick. Two-axis with a center pushbutton, it plugs into a VINT port.

This load cell interface has two inputs and a maximum data rate of 50 Hz.

Ideal for user input, this slider has 30mm of travel and connects to an Analog Input or VINT Hub port.

Ideal for user input, this slider has 100mm of travel and connects to an Analog Input or VINT Hub port.

Ideal for user input, this slider has 60mm of travel and connects to an Analog Input or VINT Hub port.

Use this array of capactive touch buttons as a unique way to control your Phidgets.

Use this capacitive touch wheel and buttons as an intuitive user interface to your Phidgets system.

Measure up to 30 amps DC or ±30 amps AC with this current sensor. Connects to an Analog Input or VINT Hub port.

This absolute air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 15 kPa to 115 kPa.

This absolute air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 15 kPa to 115 kPa.

This absolute air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 20 kPa to 400 kPa.

This sensor can detect objects that break a beam of IR light by passing through the slot.

Measure the DC current running through a wire with this convenient clip-on sensor.

This differential air pressure sensor plugs into a Voltage Input and measures pressure from -25 kPa to 25 kPa.

This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from -2 kPa to 2 kPa.

This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from -7 kPa to 7 kPa.

This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 0 kPa to 100 kPa.

This differential air pressure sensor plugs into an Analog Input or VINT Hub port and measures pressure from 0 kPa to 50 kPa.

The FlexiForce adapter allows you to connect one FlexiForce FSR to a an Analog Input or VINT Hub port.

This simple force sensor can be used as a button for human input or to sense the presence of a small object.

This board combines an ambient temperature sensor and a humidity sensor and connects to two Analog Inputs or VINT Hub ports.

This adapter lets you read Sharp distance sensors with a Phidgets Analog Input or VINT Hub port.

Measure the distance of an opaque object up to 4mm away using reflected IR light. Connects to an Analog Input or VINT Hub port.

This IR proximity sensor can detect opaque objects within 10cm and connects to an Analog Input or VINT Hub port.

Measures light intensities of up to 1000 lux and connects to an Analog Input or VINT Hub port.

Measures light intensities of up to 70 kilolux on a logarithmic scale and connects to an Analog Input or VINT Hub port.

You can measure magnetic fields or sense the proximity of a magnet with this hall-effect sensor.

This two-axis joystick has a momentary pushbutton switch and connects to two Analog Inputs or VINT Hub ports, and one Digital Input.

The pH/ORP Adapter connects any of our pH or ORP probes to an Analog Input or VINT Hub port.

This encoder interface can measure 500,000 quadrature cycles per second at 125 Hz.

This encoder interface with 4x digital inputs can measure 250,000 quadrature cycles per second at 125 Hz.

Measure global position, velocity and heading with the Phidget GPS. Best case accuracy of 2.5m CEP.

Measure the temperature of an object from a distance with this IR temperature sensor. Plugs directly into a USB port.

This inexpensive temperature sensor measures the ambient air temperature surrounding the board.

This voltage sensor measures ±30V DC and connects to an Analog Input or VINT Hub port.

Detect a touch through up to 1/2" of glass or plastic with this low-cost capacitive sensor.

This thin FlexiForce sensor is compact and easy to integrate. Measures up to 100 lb of force.

This thin FlexiForce sensor is compact and easy to integrate. Measures up to 1 lb of force.

This thin FlexiForce sensor is compact and easy to integrate. Measures up to 25 lb of force.

Measure AC active power up to 1650W at 60Hz with this sensor. Connects to an Analog Input or VINT Hub port.

Measure AC active power up to 550W at 60Hz with this sensor. Connects to an Analog Input or VINT Hub port.

Measure AC active power up to 1250W at 60Hz with this sensor. Connects to an Analog Input or VINT Hub port.

This compact load cell measures compressive forces. Calibration certificate included.

This compact load cell measures compressive forces. Calibration certificate included.

This compact load cell measures compressive forces. Calibration certificate included.

This capacitive sensor will switch when it detects metals and some other materials within 15mm.

This capacitive sensor will switch when it detects metals and some other materials within 8mm.

This capacitive sensor will switch when it detects human touch, metal, or other capacitance changes within 8mm.

This sensor measures up to 10mA DC and connects to an Analog Input or VINT Hub port.

This bi-directional current transducer measures ±100 amps DC on a wire that passes through its window.

This bi-directional current transducer measures ±250 amps DC on a wire that passes through its window.

This current transducer measures up to 100 amps DC on a wire that passes through its window.

This current transducer measures up to 250 amps DC on a wire that passes through its window.

The i-Snail VC-100 measures up to 100 amps AC on a wire that passes through its window. Connects to an Analog Input or VINT Hub port.

The i-Snail VC-10 measures up to 10 amps AC on a wire that passes through its window. Connects to an Analog Input or VINT Hub port.

The i-Snail VC-25 measures up to 25 amps AC on a wire that passes through its window. Connects to an Analog Input or VINT Hub port.

The i-Snail VC-50 measures up to 50 amps AC on a wire that passes through its window. Connects to an Analog Input or VINT Hub port.

The smallest of our Interlink FSRs, this 0.2" sensor measures up to 20 N.

This medium-sized Interlink FSR is 0.5" in diameter and measures up to 20 N.

This large, square Interlink FSR has a 1.5" sensing area and measures up to 20 N.

This K-Type thermocouple measures temperatures from -40°C to 400°C and connects to a Phidgets thermocouple board.

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.

This K-Type thermocouple measures temperatures from -40°C to 200°C and connects to a Phidgets thermocouple board.

Extend the reach of your thermocouple with this specialized wire. Cut to length (in meters).

This linear potentiometer has 75mm of travel and allows you to accurately monitor linear position.

This industrial electrode measures the ORP of a solution and connects to a pH/ORP Adapter.

This lab electrode measures the ORP of a solution and connects to a pH/ORP Adapter.

This industrial electrode measures the pH of a solution and connects to a pH/ORP Adapter.

This lab electrode measures the pH of a solution and connects to a pH/ORP Adapter.

This set of 150kg load cells are matched to one another, making them easy to use in a scale or platform.

This set of 30kg load cells are matched to one another, making them easy to use in a scale or platform.

This set of 75kg load cells are matched to one another, making them easy to use in a scale or platform.

This stainless steel probe type RTD is easy to install and plugs into a Phidgets RTD board.

This stainless steel probe type RTD is easy to install and plugs into a Phidgets RTD board.

This optical hollow shaft encoder connects directly to a Phidgets Encoder Interface.

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This encoder fits on the rear shaft of our stepper motors. Measure the rotation of your motor even when it missteps.

This simple and affordable quadrature-output encoder fits onto the 4mm rear shaft of a motor so its position and velocity can be monitored.

This optical rotary encoder connects directly to a Phidgets Encoder Interface and is sized to mount on the rear shaft of our BLDC motors.

This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.

Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.

This industrial rotary potentiometer can rotate continuously and connects to an Analog Input or VINT Hub port.

This load cell measures tensile forces (e.g. hanging loads). Calibration certificate included.

This 10kg load cell measures tensile forces (e.g. hanging loads).

This 2kg load cell measures tensile forces (e.g. hanging loads).

This 30kg load cell measures tensile forces (e.g. hanging loads).

This load cell measures tensile forces (e.g. hanging loads). Calibration certificate included.

Using reflected IR light, measure the distance of an opaque object 10-80cm away.

Using reflected IR light, measure the distance of an opaque object 20-150cm away.

Using reflected IR light, measure the distance of an opaque object 4-30cm away.

This precise shear beam load cell has a C3 accuracy grade and is designed for heavy appications.

This 130 mm load cell is ideal for medium-sized scales and platforms. Dual mounting holes allow for secure installation.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 130 mm load cell is ideal for medium-sized scales and platforms. Dual mounting holes allow for secure installation.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 150 mm load cell is ideal for larger scales and platforms. Dual mounting holes allow for secure installation.

This 55mm load cell is ideal for small weighing scales.

This 58 mm load cell is ideal for small weighing scales. Dual mounting holes allow for secure installation.

This 70 mm load cell has a C3 accuracy grade, ideal for more precise measurements.

This 130 mm load cell is ideal for medium-sized scales and platforms. Dual mounting holes allow for secure installation.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 130 mm load cell is ideal for medium-sized scales and platforms. Dual mounting holes allow for secure installation.

This 130 mm load cell is ideal for medium-sized scales and platforms. C4-grade load cells have greater accuracy.

This 150 mm load cell is ideal for larger scales and platforms. Dual mounting holes allow for secure installation.

This 55mm load cell is ideal for small weighing scales.

This 55mm load cell is ideal for small weighing scales.

This 58 mm load cell is ideal for small weighing scales. Dual mounting holes allow for secure installation.

This 45mm load cell is ideal for small weighing scales. Dual mounting holes allow for secure installation.

This 58 mm load cell is ideal for small weighing scales. Dual mounting holes allow for secure installation.

This 35mm load cell is ideal for small weighing scales. Dual mounting holes allow for secure installation.

An aluminium-framed weighing scale kit with three different load cells: 780g, 5kg, 25kg.

This inductive sensor can detect metallic objects within 5mm and behaves like a switch that connects to a digital input.

This inductive sensor will switch when it detects metallic objects within 8mm.

This linear potentiometer has 100mm of travel and allows you to accurately monitor linear position.

This linear potentiometer has 200mm of travel and allows you to accurately monitor linear position.

This linear potentiometer has 300mm of travel and allows you to accurately monitor linear position.

This linear encoder has a 300mm rail and allows you to precisely measure linear position.

This linear encoder has a 500mm rail and allows you to precisely measure linear position.

This linear encoder has a 700mm rail and allows you to precisely measure linear position.

This linear encoder has a 900mm rail and allows you to precisely measure linear position.

This linear encoder has a 1100mm rail and allows you to precisely measure linear position.

This linear encoder has a 1400mm rail and allows you to precisely measure linear position.

This linear encoder has a 1700mm rail and allows you to precisely measure linear position.

This linear encoder has a 2000mm rail and allows you to precisely measure linear position.

This magnetic switch can detect magnets within 12mm and connects to a digital input. Magnet included.

This magnetic sensor will switch when a permanent magnet is within 10mm.

This magnetic switch can detect magnets within 12mm and connects to a digital input. Magnet included.

This infrared sensor switches when a reflective object within 80cm is present.

This draw-wire sensor extends up to 1000mm and allows you to precisely measure linear position.

This draw-wire sensor extends up to 3000mm and allows you to precisely measure linear position.

This infrared sensor switches when a reflective object within 2m is present.

Use with a 3.2mm diameter probe type thermocouple to mount it into the side of an enclosure or container.

Use with a 3.2mm diameter probe type thermocouple to mount it into the side of an enclosure or container.

Use with a 3.2mm diameter probe type thermocouple to mount it into the side of an enclosure or container.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

Connect two segments of K-Type thermocouple wire together with this solderless connector.

Use with a 3.2mm diameter probe type thermocouple to mount it into the side of an enclosure or container.

Use with a 3.2mm diameter probe type thermocouple to mount it into the side of an enclosure or container.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

This infrared sensor will switch when an object blocks the path between the emitter and receiver.

Like a tripwire, this sensor detects when an opaque object breaks the IR beam between the emitter and receiver.

This multi-turn potentiometer measures 10 full rotations, useful for input applications that require a fine adjustment.

This product can be used as a drop-in replacement for legacy systems.

This product can be used as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product supports our Phidget21 libraries. Use as a drop-in replacement for legacy systems.

This product can be used as a drop-in replacement for legacy systems.

This product can be used as a drop-in replacement for legacy systems.