PG20

This kit contains everything you need to get started building with PG20 T-Slot.

This is the base component for the T-Slot system. Build it into a structure using PG20 hardware.

This is the base component for the T-Slot system. The extra width provides added strength. Compatible with all PG20 items.

This bracket reinforces a 90° joint between two PG20 profiles.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Connect two PG20 profiles at right angles by sliding these brackets into the groove of the profile.

Join two PG20 T-slot profiles into a longer one with these bar connectors. For more strength, use two or four on one joint.

M4 nut for bolting flat along PG20 T-Slot profiles.

M5 nut for bolting flat along PG20 T-Slot profiles.

M4 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

M5 nut for bolting flat along PG20 T-Slot profiles when the ends are no longer accessible.

The simplest 90° connection for PG20 profiles.

Cap off the end of your PG20 T-Slot profile.

Cap off the end of your double-width PG20 T-Slot profile.

Use these covers to give a cleaner look to your PG20 T-Slot profiles whose slots aren't being used.