Products for USB Sensing and Control
This enclosure is designed to protect the Rev 1 version of the 3051 – Dual Relay Board.
You can access the screw terminals without having to open the enclosure.
Be careful when tightening the mounting screws, excess tension can crack the acrylic.
Note: The Phidget board is not included with the enclosure and must be purchased separately.
This enclosure is desgined to fit the following Phidgets. See the "Resources" tab for assembly instructions.
$17.00
| Physical Properties | |
|---|---|
| Fits Board Revision | 1 |
| Material | Clear Acrylic |
| Thickness | 3.2 mm |
| IP Rating | 20 |
| Customs Information | |
| Canadian HS Export Code | 8473.30.00 |
| American HTS Import Code | 8473.30.51.00 |
| Country of Origin | CN (China) |
