Using Multiple Phidgets

 Phidget Programming Basics: Using Multiple Phidgets Table of Contents

11. A Basic Phidget Program13. Using the Phidget22 API

---

12 . Using Multiple Phidgets

Chances are your project with Phidgets is going to involve more than one Phidget channel. Luckily, making a program that deals with multiple Phidgets is done in much the same way as making a program that only deals with one.

This video explains the process of using multiple Phidgets in your program:

The Basics

To use more than one Phidget channel in you program, simply repeat the Create, Address, and, Open process for each channel, and remember to Close them all when done.

Addressing Channels

When you are using more than one Phidget channel in your program, you are going to have to specify some addressing parameters to ensure each software channel connects to the right Phidget.

Full descriptions of all the addressing parameters can be found on the Addressing Phidgets page.

Example

For example, to open two Phidgets, the code might be:

PythonJavaC#C

//Set up the first channel as normal
ch = TemperatureSensor()
ch.setDeviceSerialNumber(12345)
ch.setHubPort(4)
ch.setChannel(0)
ch.openWaitForAttachment(5000)

//For a second channel, simply repeat the process with different addressing information
ch1 = TemperatureSensor()
ch1.setDeviceSerialNumber(12345)
ch1.setHubPort(3)
ch1.setChannel(0)
ch1.openWaitForAttachment(5000)
 
//Do stuff with your Phidgets here...

//Remember to close the channels when done
ch.close()
ch1.close()

//Set up the first channel as normal
TemperatureSensor ch = new TemperatureSensor();
ch.setDeviceSerialNumber(12345);
ch.setHubPort(4);
ch.setChannel(0);
ch.open(5000);

//For a second channel, simply repeat the process with different addressing information
TemperatureSensor ch1 = new TemperatureSensor();
ch1.setDeviceSerialNumber(12345); 
ch1.setHubPort(3);
ch1.setChannel(0);
ch1.open(5000);
 
//Do stuff with your Phidgets here...

//Remember to close the channels when done
ch.close();
ch1.close();

//Set up the first channel as normal
TemperatureSensor ch = new TemperatureSensor();
ch.DeviceSerialNumber = 12345;
ch.HubPort = 4;
ch.Channel = 0;
ch.Open(5000);

//For a second channel, simply repeat the process with different addressing information
TemperatureSensor ch1 = new TemperatureSensor();
ch1.DeviceSerialNumber = 12345; 
ch1.HubPort = 3;
ch1.Channel = 0;
ch1.Open(5000);
 
//Do stuff with your Phidgets here...

//Remember to close the channels when done
ch.Close();
ch1.Close();

//Set up the first channel as normal
PhidgetTemperatureSensorHandle ch;
PhidgetTemperatureSensor_create(&ch);

Phidget_setDeviceSerialNumber((PhidgetHandle)ch, 12345);
Phidget_setHubPort((PhidgetHandle)ch, 4);
Phidget_setChannel((PhidgetHandle)ch, 0);
Phidget_openWaitForAttachment((PhidgetHandle)ch, 5000);

//For a second channel, simply repeat the process with different addressing information
PhidgetTemperatureSensorHandle ch1;
PhidgetTemperatureSensor_create(&ch1);

Phidget_setDeviceSerialNumber((PhidgetHandle)ch1, 12345);
Phidget_setHubPort((PhidgetHandle)ch1, 4);
Phidget_setChannel((PhidgetHandle)ch1, 0);
Phidget_openWaitForAttachment((PhidgetHandle)ch1, 5000);
 
//Do stuff with your Phidgets here...

//Remember to close the channels when done
Phidget_close((PhidgetHandle)ch);
Phidget_close((PhidgetHandle)ch1);
PhidgetTemperatureSensor_delete(&ch);
PhidgetTemperatureSensor_delete(&ch1);

Similar Phidgets

If you have a large number of the same Phidget channel and want an easier way to keep track of them all, consider using an array to keep them all together.

PythonJavaC#C

#Create the array of Phidget channels
ch = [DigitalOutput() for i in range (0, 8)]

for i in range (0, 8):
    #Address, then open the channels
    ch[i].openWaitForAttachment(5000)

#Now you can access each channel by its position in the array 
ch[0].setState(True)
ch[1].setState(False)
ch[2].setState(False)
ch[3].setState(True)

for i in range (0, 8):
    ch[i].close()

//Create an array for your Phidget channels
DigitalOutput[] ch = new DigitalOutput[8];

for(int i = 0; i < 8; i++) {
    //Create the channels
    ch[i] = new DigitalOutput();
    //Address, then open the channels
    ch[i].open(5000);
}

//Now you can access each channel by its position in the array 
ch[0].setState(true);
ch[1].setState(false);
ch[2].setState(false);
ch[3].setState(true);

//Close all channels when done
for(int i=0; i<8; i++) {
    ch[i].close();
}

//Create an array for your Phidget channels
DigitalOutput[] ch = new DigitalOutput[8];


//Open the channels
for(int i=0; i<8; i++)
{
    //Create the channels
    ch[i] = new DigitalOutput();
    //Address, then open the channels
    ch[i].Open(5000);
}

//Now you can access each channel by its position in the array 
ch[0].State = true;
ch[1].State = false;
ch[2].State = false;
ch[3].State = true;

//Close the channels when done
for(int i=0; i<8; i++)
{
    ch[i].Close();
}

//Create an array for your Phidget channels
PhidgetDigitalOutputHandle ch[8];

for (int i = 0; i < 8; i++) {
    //Create the channels
    PhidgetDigitalOutput_create(&ch[i]);
    //Address, then open the channels
    Phidget_openWaitForAttachment((PhidgetHandle)ch[i], 5000);
}

PhidgetDigitalOutput_setState(ch[0], true);
PhidgetDigitalOutput_setState(ch[1], false);
PhidgetDigitalOutput_setState(ch[2], false);
PhidgetDigitalOutput_setState(ch[3], true);

//Close the channels when done
for (int i = 0; i < 8; i++) {
    Phidget_close((PhidgetHandle)ch[i]);
}

Distinguishing Events

When using events, you can either create separate events for each device, or handle multiple devices with the same event (or some combination of both). If multiple devices use the same event handler, you can use the addressing properties of the channel to determine which Phidget channel caused the event.

For example, for an Attach Event handler:

PythonJavaC#C

In Python, the channel that fired the event can be accessed from the event handler using the self parameter (the first parameter in the list).

#Declare the event handler
def onAttachHandler(self):
    #You can access the Phidget that fired the event using the "self" parameter
    ph = self
    deviceSerialNumber = ph.getDeviceSerialNumber()
...
#Declare your object. Replace "DigitalInput" with the object for your Phidgetch = DigitalInput()
...
#Assign the handler that will be called when the event occurs
ch.setOnAttachHandler(onAttachHandler)

In Java, you can call getSource() on the event parameter to get the Phidget that caused the event.

//Declare the event listener
public static DigitalInputAttachListener onAttach = new DigitalInputAttachListener() {
    @Override
    public void onAttach(AttachEvent e) {
        //You can access the Phidget that fired the event by calling "getSource()"
        //on the event parameter.
        //Replace "DigitalInput" with the object for your Phidget.
        DigitalInput ph = (DigitalInput) e.getSource();
        int deviceSerialNumber = ph.getDeviceSerialNumber();
    }
};
...
//Declare your object. Replace "DigitalInput" with the object for your Phidget.
DigitalInput ch;
...
//Assign the event listener that will be called when the event occurs
ch.addAttachListener(onAttach);

In C#, you can access the Phidget that fired the event by typecasting the sender parameter to the appropriate Phidget object type.

//Declare the event handler
void attach(object sender, Phidget22.Events.AttachEventArgs e) {
    //You can access the Phidget that fired the event by typecasting "sender"
    //to the appropriate Phidget object type.
    //Replace "DigitalInput" with the object for your Phidget.
    DigitalInput ph = ((DigitalInput)sender);
    int deviceSerial = ph.DeviceSerialNumber;
}
...
//Declare your object. Replace "DigitalInput" with the object for your Phidget.
DigitalInput ch;
...
//Assign the handler that will be called when the event occurs
ch.Attach += attach;

In C, you can access the Phidget that fired the event using the first parameter of the event handler.

//Declare the event handler
static void CCONV onAttachHandler(PhidgetHandle ph, void *ctx) {
    //You can access the Phidget that fired the event by using the first parameter
    //of the event handler
    int deviceSerialNumber;
    Phidget_getDeviceSerialNumber(ph, &deviceSerialNumber);
}
...
//Declare your object. Replace "PhidgetDigitalInputHandle" with the handle for your Phidget object.
PhidgetDigitalInputHandle ch;
...
//Assign the handler that will be called when the event occurs
Phidget_setOnAttachHandler((PhidgetHandle)ch, onAttachHandler, NULL);

Referencing Other Phidgets from Events

When using multiple Phidgets in the same program, you may want to access one Phidget from the within an event caused by another. There are simple ways of doing this for all languages, though the specifics depend on the programming language you are using:

PythonJavaC#CJavaScript

Python is dynamically interpreted, and objects follow a less rigid structure than in other languages. To access another Phidget from an event handler, you can add the second Phidget's handle as an attribute of the Phidget object that will be triggering the event. Then, you can access the second Phidget using the corresponding attribute from the self parameter of the event.

For example, if we wanted to make a Digital Output channel follow the state of a button:

def onStateChangeHandler(self, state):
    #Be sure the other Phidget you are trying to access is attached before using it
    if(self.linkedOutput.getAttached()):
        self.linkedOutput.setState(state)

button = DigitalInput()
output = DigitalOutput()

#Addressing info here

#Here we create an attribute of input called "linkedOutput", and assign it the handle for output
button.linkedOutput = output
button.setOnStateChangeHandler(onStateChangeHandler)

output.openWaitForAttachment(5000)
button.openWaitForAttachment(5000)

# The rest of your code here....

In Java, chances are your event handlers are defined in the same class as the Phidget handles. In this case, you can simply reference Phidgets in the event handlers the same way as you would in the rest of your code.

For example, if we wanted to make a Digital Output channel follow the state of a button:

public class MultiPhidgetExample {
    
    private static DigitalInput button = null;
    private static DigitalOutput output = null;
    
    public static DigitalInputStateChangeListener onStateChange =
        new DigitalInputStateChangeListener() {
        @Override
        public void onStateChange(DigitalInputStateChangeEvent e) {

            //Be sure the other Phidget you are trying to access is attached before using it
            if(output.getAttached() == true)
                output.setState(e.getState());
        }
    };
    
    public static void main(String[] args) throws Exception {
        try {
            button = new DigitalInput();
			output = new DigitalOutput();

            //Set Any Addressing Parameters Here

            button.addStateChangeListener(onStateChange);

            output.open(5000);
            button.open(5000);
            
            // The rest of your code here...
            
        } catch (PhidgetException ex) {
            System.out.println(ex.getDescription());
        }
    }
}

In C#, chances are your event handlers are defined in the same class as the Phidget handles. In this case, you can simply reference Phidgets in the event handlers the same way as you would in the rest of your code.

For example, if we wanted to make a Digital Output channel follow the state of a button:

namespace ConsoleApplication
{
    class Program
    {
        private static DigitalInput button = null;
        private static DigitalOutput output = null;

        private static void onStateChange(object sender,
                              DigitalInputStateChangeEventArgs e)
        {
            //Be sure the other Phidget you are trying to access is attached before using it
            if (output.Attached == true)
                output.State = e.State;
        }

        static void Main(string[] args)
        {
            button = new DigitalInput();
            output = new DigitalOutput();
            
            //Set Any Addressing Parameters Here
            
            button.StateChange += onStateChange;

            output.Open(5000);
            button.Open(5000);
            
            //The rest of your code here...
        }
    }
}

In C, all event handler declarations have a context pointer that can be pointed at any object you choose. This can be a set of relevant data, or even a Phidget handle. If you pass a Phidget handle as the context pointer for an event, you can access the passed Phidget from the event as follows:

For example, if we wanted to make a Digital Output channel follow the state of a button:

static void CCONV onStateChangeHandler(PhidgetDigitalInputHandle pdih, void *ctx, int state) {
    int attached;
    //Extract our output handle from the context pointer
    PhidgetDigitalOutputHandle linkedOutput = (PhidgetDigitalOutputHandle)ctx;

    //Be sure the other Phidget you are trying to access is attached before using it
    Phidget_getAttached((PhidgetHandle)linkedOutput, &attached);

    if(attached)
        PhidgetDigitalOutput_setState(linkedOutput, state);

}

int main() {
    PhidgetDigitalInputHandle button = NULL;
    PhidgetDigitalOutputHandle output = NULL;

    PhidgetDigitalInput_create(&button);
    PhidgetDigitalOutput_create(&output);
    
    //Addressing info here

    //Here we pass the handle for "output" as the context pointer so we can access it from the event
    PhidgetDigitalInput_setOnStateChangeHandler(ch, onStateChangeHandler, output);
    
    Phidget_openWaitForAttachment((PhidgetHandle)output, 5000);
    Phidget_openWaitForAttachment((PhidgetHandle)button, 5000);

    //The rest of your code here...

}

JavaScript is dynamically interpreted, and objects follow a less rigid structure than in other languages. To access another Phidget from an event handler, you can add the second Phidget's handle as a property of the Phidget object that will be triggering the event. Then, you can access the second Phidget using the corresponding property from the this parameter of the event.

For example, if we wanted to make a Digital Output channel follow the state of a button:

function stateChange(state) {
    //Be sure the other Phidget you are trying to access is attached before using it
    if(this.linkedOutput.getAttached())
        this.linkedOutput.setState(state);
}
...
    var button = new phidget22.DigitalInput();
    var output = new phidget22.DigitalOutput();
...
    //Here we create an attribute of input called "linkedOutput", and assign it the handle for output
    button.linkedOutput = output;
    button.onStateChange = stateChange;

    output.open();
    button.open();

    //The rest of your code here...

What's Next?

Now that you know how to use multiple Phidgets in your program, we should discuss how to find the features available to you by using the Phidget22 API.

11. A Basic Phidget Program 13. Using the Phidget22 API