1024_0 v103 and tag 3911_0

[LUCA.CARIDA]

Hi guys,
here I come with an issue with my 1024_0 RFID module.

I'm trying to read this tag: https://www.phidgets.com/?tier=3&catid= ... prodid=555

but there's no way to have it detected.
I'm checking from the Phidget control panel and, even if a stick the tag to the box of the reader, that's what I can see.

phydgetRFID.PNG

Any hint? Am I missing something?

I've already installed drivers with Phidget22-x64_1.0.0.20180911.exe

It also made me update the reader firmare.

Thanks,
L.

[mparadis]

Have you tried writing to the tag? (Select PhidgetTag for the protocol and type a few letters and click write when the tag is on the box). It's possible you got the writable version (3918_0) instead of the 3911_0.

[LUCA.CARIDA]

Hi, thanks for the quick answer. Serendipity helped me out.

Writing the tag with the serie EM4100 protocol, which I supposed it was the right one according to tech specs (https://www.phidgets.com/?tier=3&catid= ... prodid=555), returns me an invalid argument error:

Error writing tag: PhidgetException 0x00000015 (Invalid Argument)

but with the PidgetTag protocol I can write the tag, and then I can read it.

So it's solved, thank you for the hint.

[mparadis]

If you're getting invalid argument when writing EM4100, it means that the string you used is invalid for the EM4100 format. You need to choose a string that is a 10 digit hexadecimal string (e.g. 0087f3bc91) so only numbers 0-9 and letters a-f are allowed. With PhidgetTag you can use any ASCII character and it can be any length.

[CrazyM0nk123]

It shows that the tags work in there but when i put em in foobar it stays the same and theres no tags

[mparadis]

If the tag isn't changing when you try to write to it and you don't get an error message, it might be because it's not a writable tag or it's been locked.