Phidget21 is no longer active, and it does not support the 16x Solid State Relay Phidget or any VINT devices.

It may fix it. There are a lot of things that can cause webcam issues (out of date drivers for example) but the first thing to check on the SBC4 is which port you're using.

Is the webcam connected to the USB port nearest to the ethernet port? If so, try using one of the other USB ports because that one is USB on-the-go and sometimes has issues with webcams.

You can find the source code at:
https://www.npmjs.com/package/node-red- ... -phidget22

If you want to contribute, tell me your npm account and I can add you as a collaborator.

The connector is the Molex 0050579404, and you'll need the associated crimp pins (
0016020102)

The pinout is as follows:
Red - USB 5V
White - USB Data-
Green - USB Data+
Black- USB Ground

GMM111 Carbon Dioxide Module From the datasheet, it looks like this sensor requires 24VDC power and outputs both 0-10V and 4-20mA for the measurement.This means you can read it using the DAQ1400 . Just connect the 12V/24V and Gnd terminals on the DAQ1400 to the 24V and 0 terminals on the CO2 module...

Since it's just a potentiometer, you can just use the VoltageRatioInput mode on the HUB port you have it connected to. You'll get data values from 0.0 to 1.0, depending on how far the wire is extended. You can multiply this value by the full range (1000mm) in order to get the value in millimeters. F...

Yes, your math is correct, it will take roughly 24*106 hall effect "position" units for one rotation with this motor. Keep in mind that the gear ratio is actually 105⅝ : 1, so if you use 106 as your gear ratio, the position will be inaccurate when calculating many rotations. The "Posi...

The controller keeps track of hall effect sensor data in the form of the "Position" property.

It looks like this error gets thrown when you try to add the same network server or dictionary twice. Perhaps the 24U program has a bug that causes it to add the same server twice, or maybe your specific setup has two dictionaries or two servers with the same handle.