Template:VINTTable

From Phidgets Support
Revision as of 18:01, 1 September 2023 by Lmpacent (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

VINT Device Mode

Vint-v.jpg

This mode is for connecting to a VINT device. The VINT Hub and VINT device communicate using a digital protocol.

Digital Input Mode

Vint-di.jpg

In digital input mode, the VINT Hub port can act as an active-low digital input. This mode is great for reading the state of buttons, switches, and any other logic-level input.

Voltage Ratio Input Mode

Vint-vr.jpg

In voltage ratio input mode, the VINT Hub port will read the voltage on the white wire and compare it to the voltage supplied on the red wire. This mode will let you read any ratiometric Phidget sensor.

Voltage Input Mode

Vint-vi.jpg

In voltage input mode, the VINT Hub port will read the voltage on the white wire. This can be used to interface a non-ratiometric sensor or to measure the voltage in a 5V digital circuit.

Digital Output Mode

Vint-do.jpg

In digital output mode, a VINT Hub port can behave like a 3.3V digital output. You could use this mode to blink an LED or switch on a MOSFET.