1002 User Guide

From Phidgets Support

Getting Started

Checking the Contents

You should have received:
  • A PhidgetAnalog 4-Output
  • A Mini-USB cable
  • A Hardware Mounting Kit
In order to test your new Phidget you will also need:
  • A device requiring a 0 to 10V signal
  • A multimeter could also be used to monitor the output voltage

Connecting the Pieces

  1. Connect your device to the PhidgetAnalog board using one of the terminal blocks.
  2. Connect the PhidgetAnalog 4-Output to your computer using the Mini-USB cable.
1002 0 Connecting the Hardware.jpg

Testing Using Windows 2000 / XP / Vista / 7

Make sure you have the current version of the Phidget library installed on your PC. If you don't, follow these steps:

  1. Go to the Quick Downloads section on the Windows page
  2. Download and run the Phidget21 Installer (32-bit, or 64-bit, depending on your system)
  3. You should see the Ph.jpg icon on the right hand corner of the Task Bar.

Testing Using Mac OS X

Using Linux

Using Windows Mobile / CE 5.0 / CE 6.0

Technical Details

API

Product History