Template:UgEncoder: Difference between revisions

From Phidgets Support
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
===Encoder===
===Encoder===
Double-click on the Encoder object, labelled ''{{{2}}}'', in order to run the example:
[[Image:{{{1}}}_Encoder_Example.jpg|center|link=]]


[[Image:{{{1}}}_Encoder_Example.jpg|right|link=]]


When you double click on an Encoder object, a window like the one pictured will open.
{{UGExampleDescription}}
 
*'''Position Change:''' the number of ticks (or quadrature cycles) that have occurred since the last change event.
* At the top of the window, information about your device and the properties of this particular channel will be listed.
*'''Time Change:''' the amount of time in milliseconds that has elapsed since the last change event.
* On the left, you can enable the input (if applicable) and specify the counts per revolution (CPR) to enable velocity calculation. Press enter after typing a number to enable velocity.
*'''Position:''' the total position in ticks relative to where the encoder was when the window was opened.
* On the right, real-time data is displayed:
*'''Index Position:''' the position where the index channel was last encountered. Some encoders do not support index, check your encoder's datasheet for more information.
** '''Position Change:''' The number of ticks (or quadrature cycles) that have occurred since the last change event.
*'''Velocity:''' the average velocity in rotations per second. A CPR must be specified to enable this functionality.
** '''Time Change:''' The amount of time in milliseconds that has elapsed since the last change event.
*Specify a counts per revolution (CPR) value to enable velocity calculation.
** '''Position:''' The total position in ticks relative to where the encoder was when the window was opened.
** '''Index Position:''' The position where the index channel (if supported by this encoder) was last encountered.
** '''Velocity:''' If a CPR has been specified, the average velocity in rotations per minute.
 
<br clear="all">

Latest revision as of 16:46, 20 June 2017

Encoder

Double-click on the Encoder object, labelled {{{2}}}, in order to run the example: [[Image:{{{1}}}_Encoder_Example.jpg|center|link=]]


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Position Change: the number of ticks (or quadrature cycles) that have occurred since the last change event.
  • Time Change: the amount of time in milliseconds that has elapsed since the last change event.
  • Position: the total position in ticks relative to where the encoder was when the window was opened.
  • Index Position: the position where the index channel was last encountered. Some encoders do not support index, check your encoder's datasheet for more information.
  • Velocity: the average velocity in rotations per second. A CPR must be specified to enable this functionality.
  • Specify a counts per revolution (CPR) value to enable velocity calculation.