Template:PT1 HUB5000 WIN MOB: Difference between revisions

From Phidgets Support
(Created page with "<div class="phd-slide-deck" data-deck="PT1_HUB5000_WIN_MOB"> <div class="phd-slide-deck-header"><h3>Connection (Mobile)</h3></div> <div class="phd-slides"> <div class="phd-sli...")
 
No edit summary
 
Line 91: Line 91:


<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_WIN_MOB/775x-/50/win_panel3.jpg"></div>
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_WIN_MOB/775x-/50/win_panel3.jpg"></div>
</div>
<div class="phd-slide">
<h2>Step 5: Update</h2>
<p>
Now that you've confirmed that you have access to your Phidgets, you should ensure the HUB5000 is fully updated. You can update the firmware of the VINT Hub by
going back to the Phidget Control Panel. If there's a blue arrow beside the version number, it means an update is available:
</p>
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_WIN_MOB/-x200/50/win_update1.jpg"></div>
<p>Right-click anywhere on that row and select <b>Upgrade Firmware</b>. When it's done, the number in the <b>Version</b> column will change.</p>
</div>
<div class="phd-slide">
<h2>Step 5: Update</h2>
<p>
Next, to update the <b>OS firmware</b>, go to the Network Phidgets tab in the control panel, find your HUB5000 and double-click on it. If the OS firmware is out
of date, you'll see the following window pop up with steps to follow:
</p>
<div class="phd-panels">
<div class="phd-panel phd-flex-column-align-center phd-flex-column-justify-middle">
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_WIN_MOB/-x200/50/win_update2.jpg"></div>
</div>
<div class="phd-panel phd-flex-column-align-left phd-flex-column-justify-middle">
<p>
1. Download the firmware (you can get it <span>[https://www.phidgets.com/downloads/phidgetsbc/HUB5000/phidgethub5000.bin here]</span> if the button does not
work)
</p>
<p>2. Open the web interface by clicking the button or entering the HUB5000's IP address in your web browser.</p>
<p>
3. Go to the <b>System tab</b> and scroll down to the <b>Upgrade Firmware</b> section. Select the file you just downloaded and click <b>Upgrade and Restart</b>.
You'll be instructed to wait a few minutes before logging back into the web interface.
</p>
</div>
</div>
</div>
<div class="phd-slide">
<h2>Step 5: Update</h2>
<p>
When you log back in, you can confirm that the new version has successfully installed by checking to see if the firmware version listed in the
<b>Status</b> section matches the first three numbers in the firmware file name that you downloaded. You can also check the version in the
<b>Network Phidgets</b> tab on the Phidget Control Panel.
</p>
<div class="phd-lazy-image" data-src="https://www.phidgets.com/decks/PT1_HUB5000_WIN_MOB/-x122/50/win_update3.jpg"></div>
</div>
</div>


Line 96: Line 147:
<h2>Done!</h2>
<h2>Done!</h2>


<p>If you're able to see and interact with your devices in the Phidget Control Panel, you're done with the Setup part of this guide.</p>
<p>
Now that you're able to see and interact with your devices in the Phidget Control Panel and they're fully updated, you're done with the Setup part of this
guide.
</p>


<p>Scroll down to <b>Part 2: Using Your Phidget</b> for the next step.</p>
<p>Scroll down to <b>Part 2: Using Your Phidget</b> for the next step.</p>

Latest revision as of 17:05, 18 July 2023

Connection (Mobile)

Step 3: Connect Wireless

1. When you connect the power supply to the HUB5000, the red LED should turn on.

Step 3: Connect Wireless

2. On your mobile device, go to the Wi-Fi settings and connect to the HUB5000:

Step 3: Connect Wireless

3. When asked for a password, enter the password printed on the HUB5000’s label.

Step 3: Connect Wireless

4. Once your device is connected to the HUB5000’s WiFi signal:

Click on the WiFi network and find an option that says “Manage router” or “Visit homepage”.

Go to your internet browser and type 192.168.100.1 in the address bar.

Step 3: Connect Wireless

5. Create a password for your HUB5000. You'll use it to access the Configure Page from now on.

Step 3: Connect Wireless

6. Navigate to the network page. Change the Mode to Client.

Step 3: Connect Wireless

7. Enter your Wifi Network details and click Save & Apply. It may take a few minutes for your Phidgets to appear in the Phidget Control Panel, which we’ll check in the next step.

Step 4: Verify Connection

1. Open the Phidgets Control Panel:

If your Control Panel does not open, look in your taskbar. Double click the Phidget Icon.

Step 4: Verify Connection

2. If connected, your Phidgets will appear in the Phidget Control Panel.

Step 5: Update

Now that you've confirmed that you have access to your Phidgets, you should ensure the HUB5000 is fully updated. You can update the firmware of the VINT Hub by going back to the Phidget Control Panel. If there's a blue arrow beside the version number, it means an update is available:

Right-click anywhere on that row and select Upgrade Firmware. When it's done, the number in the Version column will change.

Step 5: Update

Next, to update the OS firmware, go to the Network Phidgets tab in the control panel, find your HUB5000 and double-click on it. If the OS firmware is out of date, you'll see the following window pop up with steps to follow:

1. Download the firmware (you can get it here if the button does not work)

2. Open the web interface by clicking the button or entering the HUB5000's IP address in your web browser.

3. Go to the System tab and scroll down to the Upgrade Firmware section. Select the file you just downloaded and click Upgrade and Restart. You'll be instructed to wait a few minutes before logging back into the web interface.

Step 5: Update

When you log back in, you can confirm that the new version has successfully installed by checking to see if the firmware version listed in the Status section matches the first three numbers in the firmware file name that you downloaded. You can also check the version in the Network Phidgets tab on the Phidget Control Panel.

Done!

Now that you're able to see and interact with your devices in the Phidget Control Panel and they're fully updated, you're done with the Setup part of this guide.

Scroll down to Part 2: Using Your Phidget for the next step.


For more help installing in Windows (e.g. manual install, using a VM, etc.), visit this page:

● Windows Advanced Information

«
»
Retrieved from "https://www.phidgets.com/docs/index.php?title=Template:PT1_HUB5000_WIN_MOB&oldid=33871"