1121 User Guide: Difference between revisions

From Phidgets Support
No edit summary
Line 5: Line 5:
* A 1121 Voltage Divider
* A 1121 Voltage Divider
* An InterfaceKit or Hub to read the sensor
* An InterfaceKit or Hub to read the sensor
* A sensor cable
* A Phidget cable
* A USB cable
* A USB cable
* A computer
* A computer
Line 12: Line 12:
===Connecting the Pieces===
===Connecting the Pieces===
[[Image:1121_0_Connecting_The_Hardware.jpg|400px|right|link=]]
[[Image:1121_0_Connecting_The_Hardware.jpg|400px|right|link=]]
# Connect the voltage divider to the InterfaceKit or Hub with the sensor cable.
# Connect the voltage divider to the InterfaceKit or Hub with the Phidget cable.
# Connect a variable resistance sensor to the terminal block on the voltage divider. Polarity doesn't matter.
# Connect a variable resistance sensor to the terminal block on the voltage divider. Polarity doesn't matter.
# Connect the InterfaceKit or Hub to your computer with the USB cable.
# Connect the InterfaceKit or Hub to your computer with the USB cable.

Revision as of 11:00, 19 October 2016


Required Hardware

  • A 1121 Voltage Divider
  • An InterfaceKit or Hub to read the sensor
  • A Phidget cable
  • A USB cable
  • A computer
  • A variable resistance sensor

Connecting the Pieces

1121 0 Connecting The Hardware.jpg
  1. Connect the voltage divider to the InterfaceKit or Hub with the Phidget cable.
  2. Connect a variable resistance sensor to the terminal block on the voltage divider. Polarity doesn't matter.
  3. Connect the InterfaceKit or Hub to your computer with the USB cable.


Testing Using Windows

Phidget Control Panel

In order to demonstrate the functionality of the 1018, the Phidget Control Panel running on a Windows machine will be used.


The Phidget Control Panel is available for use on both macOS and Windows machines.

Windows

To open the Phidget Control Panel on Windows, find the Ph.jpg icon in the taskbar. If it is not there, open up the start menu and search for Phidget Control Panel

Windows PhidgetTaskbar.PNG

macOS

To open the Phidget Control Panel on macOS, open Finder and navigate to the Phidget Control Panel in the Applications list. Double click on the Ph.jpg icon to bring up the Phidget Control Panel.


For more information, take a look at the getting started guide for your operating system:


Linux users can follow the getting started with Linux guide and continue reading here for more information about the 1018.

First Look

After plugging the 1018 into your computer and opening the Phidget Control Panel, you will see something like this:

1018 Panel.jpg


The Phidget Control Panel will list all connected Phidgets and associated objects, as well as the following information:

  • Serial number: allows you to differentiate between similar Phidgets.
  • Channel: allows you to differentiate between similar objects on a Phidget.
  • Version number: corresponds to the firmware version your Phidget is running. If your Phidget is listed in red, your firmware is out of date. Update the firmware by double-clicking the entry.


The Phidget Control Panel can also be used to test your device. Double-clicking on an object will open an example.

Voltage Input

Double-click on a Voltage Input object in order to run the example: [[Image:{{{1}}}_VoltageInputSensor_Example.jpg|center|link=]]


General information about the selected object will be displayed at the top of the window. You can also experiment with the following functionality:

  • Modify the change trigger and/or data interval value by dragging the sliders. For more information on these settings, see the data interval/change trigger page.
  • If you have an analog sensor connected that you bought from us, you can select it from the Sensor Type drop-down menu. The example will then convert the voltage into a more meaningful value based on your sensor, with units included, and display it beside the Sensor Value label. Converting voltage to a Sensor Value is not specific to this example, it is handled by the Phidget libraries, with functions you have access to when you begin developing!


For more information about Voltage Inputs, check out the Voltage Input Primer.

Testing Using Mac OS X

  1. Go to the Quick Downloads section on the Mac OS X page.
  2. Download and run the Phidget OS X Installer
  3. Click on System Preferences >> Phidgets (under Other) to activate the Preference Pane
  4. Make sure your device is properly attached
  5. Double click on your device's objects in the listing to open them. The Preference Pane and examples will function very similarly to the ones described above in the Windows section.

Testing Using Linux

For a general step-by-step guide on getting Phidgets running on Linux, see the Linux page.

Using a Remote OS

We recommend testing your Phidget on a desktop OS before moving on to remote OS. Once you've tested your Phidget, you can go to the PhidgetSBC, or iOS pages to learn how to proceed.

Technical Details

Configuring the Voltage Divider

Why is adjusting the resistance important? The Analog Input can measure a voltage between 0V and 5V. The analog measurement is represented in the software as a value between 0 and 1000,so a sensor value of 1 unit represents a voltage of approximately 5 millivolts. When using variable resistance devices a voltage divider is commonly used to measure the changing resistance. The two resistors in the divider form a voltage, based on the ratio between them. This voltage is then measured by the Analog Input. To optimize the voltage divider to meet your need you have to adjust the fixed resistance to match the characteristics of your chosen sensor. To adjust the resistance on the Voltage Divider, simply turn the screw on the potentiometer clockwise to decrease the resistance and counterclockwise to increase it. You get between 900 ohm to 1000 ohm change in resistance per revolution. First, adjust the resistance for no stimuli on your sensor and then apply maximum stimuli and make sure that Sensor Value stays within a range that gives you expectable resolution. At the extremes (<50, >950), a very large change in stimuli (and therefore change in the resistance) produces only a small change in Sensor Value. Keep adjusting until you get a range you are happy with.

1121 0 Schematic.jpg

Non-Phidgets Sensors

Here is a list of interesting variable resistance sensors that could be used with the Voltage Divider.

Light Sensors:

http://www.digikey.com

Light Sensors - CDS Photocells (Advanced Photonics)

Search for “photocell”

Examples - “PDV-P9003-1”

Force Sensors

http://www.digikey.com

Force Sensors (CUI Inc.)

Search for “force sensor”

Examples - “IESP-12”

http://www.trossenrobotics.com

Force Sensing FSRs

Thermistors

http://www.digikey.com

Search Digikey for ‘Thermistor Radial’

Choose a thermistor with a resistance in the range 10K ohms.

Bend sensor

http://www.imagesco.com

Template:UGotherint

Phidget Cable

Analoginput.jpg

The Phidget Cable is a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labelled. The connectors are commonly available - refer to the Analog Input Primer for manufacturer part numbers.

What to do Next

  • Programming Languages - Find your preferred programming language here and learn how to write your own code with Phidgets!
  • Phidget Programming Basics - Once you have set up Phidgets to work with your programming environment, we recommend you read our page on to learn the fundamentals of programming with Phidgets.