Phidgets Forums

I would like a Phidget that could work as a DC power distribution unit.
Features:

• 12 outputs
• 20A max per output
• 75A max per box
• works at DC 12-60V
• PWM support
• current measurement of each output
• Set a max current of each output before it disconnects (also handles momentary in-rush current) (basically the reset-able fuse size)
• Current/Voltage Sampling rate <1sec

The controller can set:

• the PWM duty cycle
• on/off
• reset over current fault
• max current set independently for each output

The data the controller would receive:

• current measurement for each channel
• if it is in fault mode
• the voltage for the whole device.

Bonus:

• it also works for AC120V@15A
• the DC voltage can be independently controlled at each output provided the base voltage is higher.