Connect Current Tranducer direct to interface board 2/2/2

Comments & issues
Post Reply
aida saufi
Phidgetsian
Posts: 5
Joined: Thu Aug 25, 2016 10:31 pm
Contact:

Connect Current Tranducer direct to interface board 2/2/2

Post by aida saufi »

Hello, I am connecting 3513_0 - CE-IZ02-32MS2-0.5 DC Current Sensor 0-1A directly to interface board without 1144 adapter as suggested in http://www.phidgets.com/products.php?ca ... _id=3513_0, But the value does not appear at all. Is it really necessary to supplied with 12V? as I need to connect it to pc usb which supply only 5V. I connect white analog cable to terminal 8 and black cable ground to terminal 6 (red does not connected to any) as shown in second image. But still value does not show up. Kindly help..

http://i1079.photobucket.com/albums/w52 ... 5x8cgx.jpg

http://i1079.photobucket.com/albums/w52 ... hrnyq.jpeg
User avatar
mparadis
Site Admin
Posts: 959
Joined: Fri Oct 28, 2011 12:17 pm
Contact:

Re: Connect Current Tranducer direct to interface board 2/2/

Post by mparadis »

Yes, the 3513_0 requires 12V power, so you'll either need the 1144 to step the 5V supply up to 12V, or you'll need to provide an external 12V supply and connect it as shown in this diagram.
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests