Trying to connect to MOT2002 thru HUB00001, C# in VS2022
* In the Phidget control panel, works perfectly (using Voltage Input Mode and setting to generic voltage input or as MOT2002, or using Digital Input Mode) -> no problem with hardware
* Have HUM1001 and LUX100 connected to the same hub, those work perfectly with their sample programs -> no problem with libraries
* But using sample programs VoltageInput or DigitalInput I get "Attached: Nothing" -> problem!
I tried something like this with no success. Will try again in a few days (away from my workbench for now), and post code if I can't make it work.
BTW, the MOT2002 page does not let you build a sample project, it directs you to the hub, where you have to work out the specifics for the device - which I failed at!
There is a Code Samples tab on the MOT2002 page that allows you to select a programming language and the Hub you are connecting to, which will give you code specific to your use-case to get started.