This is all that came up in the log of the hub that does that 'flashing behavior: 2020-03-06T17:38:59 <ERROR> phidget22 : ****************************** Logging Enabled ****************************** * Phidget22 - Version 1.6 - Built Mar 6 2020 10:34:26 * ********************************************...

Here is the log from the hub that doesn't show any branches or connected devices in the Control Panel: 2020-03-06T17:38:49 <ERROR> phidget22 : ****************************** Logging Enabled ****************************** * Phidget22 - Version 1.6 - Built Mar 6 2020 10:34:26 * ***********************...

Good morning Patrick, The 5 hubs in the machine seem to be all communicating happily now. It was definitely 'operator error' on my part, because once I had the IP's all configured it still wasn't working repeatably until... I changed the host names of the hubs so they weren't all the default "h...

Would I be better off with the USB version of the hub? I had some issues with USB connectivity on other projects and thought that the ethernet option would be more solid in the end, but for the price of 5 hubs, if the USB version is solid and less of a pain to configure for this, I could use the 500...

As far as the logs, I only see "System" and "Kernel" logs in the web interface. Are these what you are looking for?

Dan

Total of 5 hubs in this project. I own 6 good ones and the two with the issues for a total of 8 hubs on the bench here. I'll plug in the ones with the issues and post those logs. I updated all the hubs,including the ones I did a factory reset on. The version that it saved as is this: phidgethub5000_...

Hi, I configured the 5 other hubs I have here exactly the same way and they all work flawlessly through their ethernet connections. These are the hardware problems I found after factory resets, software updates and identical configurations to above: 1- One hub shows up in the Phidgets tab of the PH ...

Another update: It turns out I do have some hardware issues. I configured the 5 other hubs I have here as described above and they all work flawlessly through the ethernet connections. These are the hardware problems I found after factory resets, software updates and identical configurations to abov...

Update:
I restarted the PC and hub and now the hub shows up under the Phidgets tab, but i doesn't show the VINT devices connected to it. I've tried a few different hubs, devices and cables to eliminate hardware issues, so I am stuck again. Much closer now though.
Dan

Hi Patrick, I set the PC'c Ethernet (static) settings as follows: IP:192.168.123.123 Subnet Prefix length: 24 (no option in Win 10 for Subnet Mask?) Gateway: 19.168.123.1 And the Hub as: IP:192.168.123.10 Subnet Mask: 255.255.255.0 Gateway: 19.168.123.1 Now the Phidgets Control Panel shows the Hub c...