In this case, you'll need to configure the HUB and laptop ahead of time to have static IPs on the same subnet.

-Patrick

Can you post the output of lsusb?

Try increasing the open timeout?

Enable logging in the library and post the output?

-Patrick

Hi Patrick! Thank you for your response. My 4x is a second generation with mention that it can work but the shield does not show on the case. Also, the Icon in the Phidget Control Panel does not show in red with the mention ...

... Some new VINT devices also support higher speeds, but this kind of spec change would also result in a new rev of the product - ie TMP1101_2. -Patrick

... just to confirm whether you can open the Phidget. If you are still having issues, enable logging in the library and see if there are any errors. -Patrick

Hi,

You need to add to the start of your .py file:

#!/usr/bin/env python3

-Patrick

I see in the user log: Deleted post “Getting data from new Phidget Hub” written by “bitout” for the following reason: Spam.

This usually means that your post included a spammy link, but a mistake could have been made. You can re-post your question.

-Patrick

The warning about i386 arch is just a warning and should not affect anything. I've talked to Brian about helping you myself tomorrow, as I would like to get to the bottom of this.

-Patrick

Correct, the Control Panel is using Bonjour. The Phidget API supports AddServer which allows you to just use the IP address.

-Patrick

The red VINT icon indicates a high-speed capable VINT2 device. When there is an upgrade you'll see a blue arrow-up icon next to the version.

-Patrick