PhidgetLED-64 Advanced wiring

Comments & issues
Post Reply
Metall4You
Phidgetsian
Posts: 5
Joined: Thu Feb 28, 2019 12:50 pm
Contact:

PhidgetLED-64 Advanced wiring

Post by Metall4You »

Hello

I have the following Question about the wiring with only one Ground Cabel for the LED's. See my Picture... I use the Software Prosim737.

How can wiring them correctly?

Any Idee?

Kind Regards

Ramon
Attachments
indicator_pcba_boeing_01.jpg
fitchett
Site Admin
Posts: 266
Joined: Fri Dec 05, 2003 3:45 pm
Location: Canada
Contact:

Re: PhidgetLED-64 Advanced wiring

Post by fitchett »

All of the 'Anode' Pins (selectable 1.7 to 5.0 volts) are wired together on the LED64. This is the Red Wire.

The current is controlled on the cathode side of the LED; the black wire. So, you can't connect all the 'grounds' together in your project; but you can connect all the +5V together. We control the LED through the 'ground'.
Metall4You
Phidgetsian
Posts: 5
Joined: Thu Feb 28, 2019 12:50 pm
Contact:

Re: PhidgetLED-64 Advanced wiring

Post by Metall4You »

Many thanks, works great...

Kind Regards Rmon
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests