Phidget21

Comments & issues
Post Reply
Ruchi
Fresh meat
Posts: 1
Joined: Thu Jun 14, 2018 4:50 am
Contact:

Phidget21

Post by Ruchi »

HI all,

I am very new to using Relay and phidget board.
I am facing one below mentioned issue with the usage of board:

1. am trying to activate relay 0 and relay 1 from the board one by one,but unable to do so.
For example:
1. I turned ON the relay 0 using phidget control panel.
2. Then i try to turn on the Relay 1, but it truns OFF the relay 0 rather turning ON the relay 1 as well.

Can you please let me know how to make 2 relays to be activated at the same time on the board i am using.Attaching the image of the board i am using.

Thanks in advance :) !!
fraser
Engineering
Posts: 324
Joined: Thu Nov 19, 2009 4:41 pm
Contact:

Re: Phidget21

Post by fraser »

Which relay device are you using?
User avatar
Patrick
Lead Developer
Posts: 3399
Joined: Mon Jun 20, 2005 8:46 am
Location: Canada
Contact:

Re: Phidget21

Post by Patrick »

This is probably a voltage dropout issue causing the board to reset. try a shorter / thicker cable, and try connecting directly to the PC, or using a powered hub.

-Patrick
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 5 guests