Recommended type of connection for Load Cells

Comments & issues
Post Reply
RTScale
Fresh meat
Posts: 1
Joined: Mon Aug 02, 2021 8:23 am
Contact:

Recommended type of connection for Load Cells

Post by RTScale »

Dear all,

during designing in a Load Cell into a new product the question about the type of connection came up. Is there any recommendation for a soldered or a plugged connection?

Thanks for all shared thoughts.

Regards,
RTScale
User avatar
mparadis
Site Admin
Posts: 959
Joined: Fri Oct 28, 2011 12:17 pm
Contact:

Re: Recommended type of connection for Load Cells

Post by mparadis »

It really comes down to what the application is. If you think the cable is going to need to be unplugged and plugged in frequently, you should prioritize an ergonomic connector that is durable enough to last. If a potentially uneducated user is going to be interacting with it, the connector should have a notch that prevents it from being plugged in backwards.

If it's mostly going to be plugged in once and left alone, you should look for a connector that will keep a snug connection even if there's vibration or movement. If cost is an issue, you can just crimp pins on the ends of the wires and screw them into the Phidgets' screw terminals- this is enough to hold them firmly in place.
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests