Starting with Labview coding

Supporting Labview 2012 and up
olivier
Fresh meat
Posts: 2
Joined: Thu May 22, 2014 5:26 am
Contact:

Starting with Labview coding

Postby olivier » Thu May 22, 2014 5:40 am

Hello,
I'm new with Phidgets stuff and Labview.
I need to code some actions to do with my SBC3 board.
To start I follow the Labview manual going with Phidget.
So my first code in Labview is very simple and I encounter an 7004 error.

I'm connecting the SBC3 with my computer using Ethernet connexion, so I use PhidgetOpenRemote.vi and I put a constant to enter in the serial number, I put also an indicator to read my serial number and that's it. (I did try the same with the PhidgetOpen.vi also)

Thanks for your help :-)

olivier
Fresh meat
Posts: 2
Joined: Thu May 22, 2014 5:26 am
Contact:

Re: Starting with Labview coding

Postby olivier » Thu May 22, 2014 5:44 am

Voilà une capture d'écran
http://cjoint.com/?0EwnQseCoKD


Return to “Labview”

Who is online

Users browsing this forum: No registered users and 2 guests