I have recently purchased the following:
1122 (2off) 30A current sensors
1011 USB Interface kit
I have already been successful in connecting the devices to my PC USB port and getting DC current measurements through the Phidgets software. The measurements are not correct in the software (they are compared with a calibrated inline DC current meter), they come out about 200mA lower on both sensor.
I presume the measurement accuracy is dependant on certain factors, like supply voltage to the sensors?
Anyway the main problem I have at the moment, is finding an example with this setup, in LabVIEW 2012 SP1. It seems to me, that there is an example for everything else Phidgets Inc makes but not current sensors. Once I see an example I can figure out the rest myself.
Any helpful nudge in the right direction would be appreciated.