Supporting Labview 2012 and up
Fresh meat
Posts: 1
Joined: Thu Oct 11, 2012 4:30 pm


Postby obrie540 » Thu Oct 11, 2012 5:53 pm


I am trying to automate a CSTR.

I am first automating the gas flow to the CSTR
The connections I will have will start from a Alicat: Communication Module (BB9) found here.

The setup:

[Serial to USB adapter]---->[USB Hub]---->[Computer(Language: lab view)]

Note: the USB hub is the 1019-PhidgetInterfaceKit 8/8/8 w/6 Port Hub

If in the future I might be using other connections to the Hub that might be Serial connections should I use a Serial Hub? I looked on the Phidget website and could Not find one.

Any help is much appreciated!!

User avatar
Human-Cyborg Relations
Posts: 441
Joined: Tue Sep 27, 2011 2:37 pm
Location: Calgary

Re: CSTR-Automation

Postby burley » Fri Oct 12, 2012 9:36 am

We do not have any serial hubs. All Phidgets devices are USB based and as such we don't deal with serial all that often. We have the Serial to USB adapters to allow connecting serial devices to an SBC but that is about it.
Brian Burley
403-282-7335 ext. 6003

Return to “Labview”

Who is online

Users browsing this forum: No registered users and 1 guest