Phidget Spatial.lvlib:SpatialSetHeatingEnabled.vi

Set to TRUE to enable the temperature stabilization feature of this device. This enables on-board heating elements to bring the board up to a known temperature to minimize ambient temperature effects on the sensor's reading. You can leave this setting FALSE to conserve power consumption.

If you enable heating, it is strongly recommended to keep the board in its enclosure to keep it insulated from moving air.

This property is shared by any and all spatial-related objects on this device (Accelerometer, Gyroscope, Magnetometer, Spatial)

Phidget Spatial.lvlib:SpatialSetHeatingEnabled.vi

cu64

Device In

Device # Identification

cerrcodeclst

error in (no error)

error in can accept error information wired from VIs previously called.

cbool

Enabled

Whether self-heating temperature stabilization is enabled

1042_0 (ver: 300, 301, 302, 303) Spatial: Unsupported

1044_0 (ver: 400, 401, 402, 403) Spatial: Unsupported

1044_1 (ver: 500, 502) Spatial: Unsupported

1044_1 (ver: 511) Spatial: Unsupported

1056_0 (ver: 100, 101, 102) Spatial: Unsupported

1056_0 (ver: 200) Spatial: Unsupported

MOT1101_0 (ver: 112, 113) Spatial: Unsupported

MOT1102_0 (ver: 210, 212) Spatial: Unsupported

MOT1102_1 (ver: 300) Spatial: Unsupported

MOT0109_0 (ver: 112, 113, 115, 117) Spatial: Val: 0

MOT0110_0 (ver: 100) Spatial: Val: 0

MOT0110_0 (ver: 100) Spatial: Val: 0

iu64

Device Out

Same as Device In

ierrcodeclst

error out

error out passes error or warning information out of a VI to be used by other VIs.