The FanMode
dictates the operating condition of the fan.
FanMode
is set to automatic, the fan will turn on when the temperature reaches 70°C and it will remain on until the temperature falls below 55°C.FanMode
is off, the controller will still turn on the fan if the temperature reaches 85°C and it will remain on until it falls below 70°C.
|
Device In Device # Identification |
|
error in (no error) error in can accept error information wired from VIs previously called. |
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
code code is the error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
source source describes the origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
Fan Mode The fan mode
1060_0 (ver: 100, 110) DC Motor Controller: Unsupported
1064_0 (ver: 100, 101, 102) DC Motor Controller: Unsupported
1064_1 (ver: 102) DC Motor Controller: Unsupported
1065_0 (ver: 100, 101) DC Motor Controller: Unsupported
DCC1000_0 (ver: 100) DC Motor Controller: Val: FAN_MODE_AUTO |
|
Device Out Same as Device In |
|
error out error out passes error or warning information out of a VI to be used by other VIs. |
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
code code is the error or warning code. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
source source describes the origin of the error or warning. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |