The last code the controller has learned.
codeInfo
structure holds data that describes the learned code.1055_0 (ver: 100, 101) IR Receiver Transmitter : Supported
|
Device In Device # Identification |
|
error in (no error) error in can accept error information wired from VIs previously called. |
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
code code is the error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
source source describes the origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
Device Out Same as Device In |
|
error out error out passes error or warning information out of a VI to be used by other VIs. |
|
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
code code is the error or warning code. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
source source describes the origin of the error or warning. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
|
Learned Code The last learned code |
|
Code Info contains the data for characterizing the code |
|
bitCount Number of bits in the code |
|
encoding Encoding technique used to encode the data
|
|
length Constant or Variable length encoding
|
|
gap Gap time in microseconds |
|
trail Trail time in microseconds. Can be zero for no trail |
|
header[0] Header pulse and space. Can be zero for no header |
|
header[1] |
|
one[0] Pulse and Space times to represent a '1' bit, in microseconds |
|
one[1] |
|
zero[0] Pulse and Space times to represent a '0' bit, in microseconds |
|
zero[1] |
|
repeat[0] A series or pulse and space times to represent the repeat code. Start and end with pulses and null terminate. Set to 0 for none. |
|
repeat[1] |
|
repeat[2] |
|
repeat[3] |
|
repeat[4] |
|
repeat[5] |
|
repeat[6] |
|
repeat[7] |
|
repeat[8] |
|
repeat[9] |
|
repeat[10] |
|
repeat[11] |
|
repeat[12] |
|
repeat[13] |
|
repeat[14] |
|
repeat[15] |
|
repeat[16] |
|
repeat[17] |
|
repeat[18] |
|
repeat[19] |
|
repeat[20] |
|
repeat[21] |
|
repeat[22] |
|
repeat[23] |
|
repeat[24] |
|
repeat[25] |
|
minRepeat Minium number of times to repeat a code on transmit |
|
dutyCycle Duty Cycle in percent (0.1-0.5). Defaults to 0.33 |
|
carrierFrequency Carrier frequency in Hz - defaults to 38kHz |
|
toggleMask[0] Bit toggles, which are applied to the code after each transmit |
|
toggleMask[1] |
|
toggleMask[2] |
|
toggleMask[3] |
|
toggleMask[4] |
|
toggleMask[5] |
|
toggleMask[6] |
|
toggleMask[7] |
|
toggleMask[8] |
|
toggleMask[9] |
|
toggleMask[10] |
|
toggleMask[11] |
|
toggleMask[12] |
|
toggleMask[13] |
|
toggleMask[14] |
|
toggleMask[15] |
|
toggleMask[16] |
|
toggleMask[17] |
|
toggleMask[18] |
|
toggleMask[19] |
|
toggleMask[20] |
|
toggleMask[21] |
|
toggleMask[22] |
|
toggleMask[23] |
|
toggleMask[24] |
|
toggleMask[25] |
|
toggleMask[26] |
|
toggleMask[27] |
|
toggleMask[28] |
|
toggleMask[29] |
|
toggleMask[30] |
|
toggleMask[31] |
|
toggleMask[32] |