Alert.png

Notice: This page contains information for the legacy Phidget21 Library.

Phidget21 is out of support. Bugfixes may be considered on a case by case basis.

Phidget21 does not support VINT Phidgets, or new USB Phidgets released after 2020. We maintain a selection of legacy devices for sale that are supported in Phidget21.

We recommend that new projects be developed against the Phidget22 Library.


Click on the 2phidget22.jpg button in the menu bar to go to the Phidget22 version of this page.

Alert.png

Template:AnalogConnector

From Phidgets Legacy Support
Revision as of 18:54, 11 April 2014 by Mparadis (talk | contribs) (Created page with "Each Analog Input uses a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labeled. [[Image:analoginput.jpg|right|thumb|link=|A 3-pin...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Each Analog Input uses a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labeled.

A 3-pin analog connector.

The connectors are commonly available - refer to the Table below for manufacturer part numbers.


Cable Connectors
Manufacturer Part Number Description
Molex 50-57-9403 3 Position Cable Connector
Molex 16-02-0102 Wire Crimp Insert for Cable Connector
Molex 70543-0002 3 Position Vertical PCB Connector
Molex 70553-0002 3 Position Right-Angle PCB Connector (Gold)
Molex 70553-0037 3 Position Right-Angle PCB Connector (Tin)
Molex 15-91-2035 3 Position Right-Angle PCB Connector - Surface Mount


Note: Most of the above components can be bought at an electronic parts supplier such as www.digikey.com.