Alert.png

Notice: This page contains information for the legacy Phidget21 Library.

Phidget21 is out of support. Bugfixes may be considered on a case by case basis.

Phidget21 does not support VINT Phidgets, or new USB Phidgets released after 2020. We maintain a selection of legacy devices for sale that are supported in Phidget21.

We recommend that new projects be developed against the Phidget22 Library.


Click on the 2phidget22.jpg button in the menu bar to go to the Phidget22 version of this page.

Alert.png

Language - C

From Phidgets Legacy Support

Icon-C++.png C++ is a general purpose, cross-platform programming language with a vast user base.

More specific C/C++ information in each section, Installing libraries without installer, just dll (Windows Page), getting examples into dev tool (.h, etc), how to set up blank project, links to specialized examples if needed (not code examples necessarily but, say, linking MFC)

Support

If this is your first time working with a Phidget, we suggest starting with the Getting Started page for your specific device. This can be found in the user guide for your device. That page will walk you through installing drivers and libraries for your operating system, and will then bring you back here to use C/C++ specifically.

C/C++ is capable of using the complete Phidget API. We also provide example code in C/C++ for all Phidget devices.

C/C++ can be developed with various Windows compilers (including Borland), Mac OSX, and Linux.{{{5}}}

You can compare C/C++ with our other supported languages.

Quick Downloads

Just need the C/C++ drivers, libraries, and examples? Here they are:

C/C++ API Documentation:

C/C++ Example Code:

Libraries and Drivers:

Getting Started (Windows)

Run The Examples

A good way to learn to use Phidgets is to run and modify existing examples. You can find the C/C++ API and example code here:

To run the example code, you'll need to find the source code for your specific device within the example package. Then, compile the code under your platform and run it. This will allow you to:

  • Make sure your libraries are properly linked
  • Go from source code to a test application as quickly as possible
  • Ensure your Phidget is hooked up properly

The Phidget examples were written using Visual C++ 2005. They also work well in other, similar environments such as Visual Studio.

Specific setup for many other compilers is covered below. Often, you can just import the example as an existing project, but if you are having trouble it might help to read the Write Your Own Code section below for your specific compiler.

Follow The Examples

The Hello World example has this general structure so you can follow along. We also have an in-depth general introduction to writing Phidget code (like open, read data, etc), as well as the {{{3}}} for specific syntax:

// ----- Event and Other Functions -----

Create any Language-Specific Functions (exception handling)

Create General Attach, Detach, and Error Handling Functions:

On attach: Print Hello Message
On detach: Print Goodbye Message

 

{{{1}}}

// ----- Main Code -----

Create Manager Software Object
Hook Event Functions created above to Device
Open Device

Wait for 'Enter' key character input
Handle on-going attach and detach events
Print Hello and Goodbye messages
Exit upon input

Close Device

Delete Device

 

{{{2}}}

Write Your Own Code (Windows)

  • C/C++ API (This is the complete set of functions you have available for all Phidgets)
  • Device Specific APIs - The one for your Phidget can be found in its user guide.

To learn the details behind opening, configuring, using, and closing your Phidget, try the General Phidget Programming page. That page also describes using the Phidget in an event-driven manner and in a traditional manner, both of which are available in C/C++.


These Windows sections below need additional information

General Windows Library Setup


In addition to actually creating code to drive your Phidget, you will also need to properly link the Phidget C/C++ libraries, which are included with the drivers above. Most compilers provide their own documentation on how to link external libraries. (Note that for Borland, you'll need a different library, which you can find in the Borland section below).

Then, in your code, you usually need to include the Phidget library specifically:

  #include "phidget21.h"

Visual C++ 2005 Library Setup

To link libraries in Visual C++ 2005:

  • Generate a new C/C++ console project with a descriptive name such as PhidgetTest.
  • Copy phidget21.h and phidget21.lib from the VC/VC++/Borland examples and add them to your project directory.
  • Open the project properties window.
  • Navigate to Configuration Properties | Linker | Input.
  • Edit the additional dependencies and add “phidget21.lib”.

The project now has access to the Phidget21 function calls and you are ready to begin coding.

Borland C/C++ Library Setup

To link libraries in Borland C/C++:

Make sure to download the additional Borland-specific libraries in addition to the drivers you already have through the Getting Started page for your device:

Dev C++ Library Setup

In order to control Phidgets with Dev-C++, the library file will need to be in a format that Dev-C++ accepts, as described in the following steps. The following steps works with Dev-C++ 4.9.9.2. Download the reimp tool(Please download it here), and type the following command to create libphidget21.a.

reimp.exe "C:\Program Files\Phidgets\phidget21.lib"

Place libphidget21.a in <Dev-Cpp Install Directory>/lib

Open up your project in Dev-C++, and traverse to Project Options->Parameters->Linker, and enter the following to link to the library:

-lphidget21

Next, the path to phidget21.h will need to be specified. Traverse to Project Options->Directories->Include Directories, and add the path to the Phidget installation directory:

C:\Program Files\Phidgets

Create and Build Your Project

This section may also require expansion into individual compilers

With the libraries linked properly in your compiler, you can consult the following resources for help with writing code:

Build and compile your project with the properly linked libraries as you would any project on your specific compiler.

Getting Started (MacOS/Linux)

Run The Examples

One good way to start developing your application is to run and modify existing examples. You can find the C/C++ API and example code here:

To run the example code, you'll need to find the source code for your specific device. Then, compile the code under your platform and run it. This will allow you to:

  • Make sure your libraries are properly linked
  • Go from source code to a test application as quickly as possible
  • Ensure your Phidget is hooked up properly

The examples assume that the compiled libraries have been set up properly.

  • To set them up on Mac OSX, follow the Getting Started page for your specific device
  • To set them up on Linux, compile and install them as explained on the main Linux page

Compiling and linking against the Phidgets Library for the example code can be done in the following ways:

To build on Linux:

  gcc example.c -o example -lphidget21

To build on MacOS (for example, depending on the Headers location):

  gcc example.c -o example -framework Phidget21 -I/Library/Frameworks/Phidget21.framework/Headers

After using gcc, you will have an executable named example that you can run. On Linux, if you have not set up your udev rules for USB access you will need to run the program as root.

Follow The Examples

The Hello World example has this general structure so you can follow along. We also have an in-depth general introduction to writing Phidget code (like open, read data, etc), as well as the {{{3}}} for specific syntax:

// ----- Event and Other Functions -----

Create any Language-Specific Functions (exception handling)

Create General Attach, Detach, and Error Handling Functions:

On attach: Print Hello Message
On detach: Print Goodbye Message

 

In C/C++ on Linux or Mac, you can name these event functions whatever you like. You will then pass them as function pointers to the Phidget library below in the Main Code section. This hooks them into the actual events when they occur.
In the example code, the event functions common to all Phidgets are called things like AttachHandler() and DetachHandler(), etc.

Some event functions will be specific to each device, like when a tag is read on an RFID board, or when a sensor value changes on an Interface Kit. Other functions are given in the examples to show you more detail on using your Phidget. For example, DeviceInitialize() will show what needs to be set up for your Phidget before using it.

// ----- Main Code -----

Create Manager Software Object
Hook Event Functions created above to Device
Open Device

Wait for 'Enter' key character input
Handle on-going attach and detach events
Print Hello and Goodbye messages
Exit upon input

Close Device

Delete Device

 

Creating a Phidget software object in C is specific to the Phidget. For a Phidget Spatial, for example, this would involve creating an object with the CPhidgetSpatialHandle type, and then initializing it using the CPhidgetSpatial_create function. The examples show how to do this and other API functions.

Other C calls follow a similar syntax - CPhidgetXXX_function, where XXX is the name of your device, and function is an action available from the API for your specific Phidget.

Write Your Own Code (Mac OSX/Linux)

  • C/C++ API (This is the complete set of functions you have available for all Phidgets)
  • Device Specific APIs - The one for your Phidget can be found in its user guide.

To learn the details behind opening, configuring, using, and closing your Phidget, try the General Phidget Programming page. That page also describes using the Phidget in an event-driven manner and in a traditional manner, both of which are available in C/C++.

General Mac OS/Linux Library Setup

Before you can use the Phidget, you must include a reference to the library header.

  #include <phidget21.h>

Create and Build Your Project

With the libraries linked properly in your compiler, you can consult the following resources for help with writing code:


Compiling and linking against the Phidgets Library can be done in the following ways:

To build on Linux:

  gcc example.c -o example -lphidget21

To build on MacOS (for example, depending on the Headers location):

  gcc example.c -o example -framework Phidget21 -I/Library/Frameworks/Phidget21.framework/Headers

Development Environments and Compilers

Describe each major compiler and notable differences or important information. (eg. framework versions) If there are known issues/workarounds mention them and link to the corresponding issue at the bottom of the page.

This section may or may not be covered in the different compilers sections above in Getting Started (Windows), and the common problems below? If so, delete this section.

Dev C++
In order to control Phidgets with Dev-C++, the library file will need to be in a format that Dev-C++ accepts, as described in the following steps. The following steps works with Dev-C++ 4.9.9.2. Download the reimp tool(Please download it here), and type the following command to create libphidget21.a.

reimp.exe "C:\Program Files\Phidgets\phidget21.lib"

Place libphidget21.a in <Dev-Cpp Install Directory>/lib

Open up your project in Dev-C++, and traverse to Project Options->Parameters->Linker, and enter the following to link to the library:

-lphidget21

Next, the path to phidget21.h will need to be specified. Traverse to Project Options->Directories->Include Directories, and add the path to the Phidget installation directory:

C:\Program Files\Phidgets

Your program will now have access to Phidgets


Manual Install

Windows
Files needed: phidget21.h, phidget21.lib, phidget21.dll These files should be linked to Library Page - file section
Place phidget21.dll into C:\WINDOWS\system32. phidget21.h and phidget21.lib can be placed anywhere as long as the path to them are specified with your compiler

Common Problems and Solutions/Workarounds

Here you can put various frequent problems and our recommended solutions.