1104 User Guide - Revision history

Mparadis: /* 1104 */

2018-05-10T16:17:50Z

1104

← Older revision		Revision as of 16:17, 10 May 2018
Line 23:		Line 23:
	The 1104 buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate in free space the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.		The 1104 buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate in free space the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

	A voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.		A voltage ratio of 0.5 roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage ratio to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.

	{{UGasens}}		{{UGasens}}

	{{UGnext\|}}		{{UGnext\|}}

Mparadis at 20:57, 8 May 2018

2018-05-08T20:57:58Z

← Older revision		Revision as of 20:57, 8 May 2018
Line 1:		Line 1:
			__NOINDEX__
	<metadesc>The Phidgets Vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an Analog Input or VINT Hub port.</metadesc>		<metadesc>The Phidgets Vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an Analog Input or VINT Hub port.</metadesc>
	[[Category:UserGuide]]		[[Category:UserGuide]]

Jdecoux at 16:47, 11 April 2018

2018-04-11T16:47:17Z

← Older revision		Revision as of 16:47, 11 April 2018
Line 7:		Line 7:
	Next, you will need to connect the pieces:		Next, you will need to connect the pieces:
	[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]		[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]
	# Connect the 1104 to the ~~1018~~ with the Phidget cable.		# Connect the 1104 to the HUB0000 with the Phidget cable.
	# Connect the ~~1018~~ to your computer with the USB cable.		# Connect the HUB0000 to your computer with the USB cable.

	<br clear="all">		<br clear="all">
Line 14:		Line 14:

	==Using the 1104==		==Using the 1104==
	{{UGcontrolpanelSensor\|1104\|~~1018~~}}		{{UGcontrolpanelSensor\|1104\|HUB0000}}

	{{UGSensorVoltageRatioInputUnitless\|1104\|-1 and 1\|}}		{{UGSensorVoltageRatioInputUnitless\|1104\|-1 and 1\|}}

Mparadis at 16:12, 29 November 2017

2017-11-29T16:12:25Z

← Older revision		Revision as of 16:12, 29 November 2017
Line 1:		Line 1:
			<metadesc>The Phidgets Vibration sensor uses a piezoelectric element to measure vibration on a surface and connects to an Analog Input or VINT Hub port.</metadesc>
	[[Category:UserGuide]]		[[Category:UserGuide]]
	==Getting Started==		==Getting Started==

Lmpacent at 16:20, 19 June 2017

2017-06-19T16:20:33Z

← Older revision		Revision as of 16:20, 19 June 2017
Line 6:		Line 6:
	Next, you will need to connect the pieces:		Next, you will need to connect the pieces:
	[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]		[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]
	# Connect the ~~vibration sensor~~ to the 1018 with the Phidget cable.		# Connect the 1104 to the 1018 with the Phidget cable.
	# Connect the 1018 to your computer with the USB cable.		# Connect the 1018 to your computer with the USB cable.

Line 18:		Line 18:

	==Technical Details==		==Technical Details==
	===~~Piezoelectric Transducer~~===		===1104===
	~~This sensor~~ buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate ~~“in~~ free ~~space”~~ the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.		The 1104 buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate in free space the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

	A voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.		A voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.

Lmpacent at 16:11, 16 June 2017

2017-06-16T16:11:58Z

← Older revision		Revision as of 16:11, 16 June 2017
Line 15:		Line 15:
	{{UGcontrolpanelSensor\|1104\|1018}}		{{UGcontrolpanelSensor\|1104\|1018}}

	{{~~UGSensorVoltageRatioInput~~\|1104\|~~a value from~~ -1 to 1}}		{{UGSensorVoltageRatioInputUnitless\|1104\|-1 and 1\|}}

	==Technical Details==		==Technical Details==
			===Piezoelectric Transducer===
	This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.		This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

	A ~~sensor~~ voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.		A voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.

	{{UGasens}}		{{UGasens}}

	{{UGnext\|}}		{{UGnext\|}}

Lmpacent at 22:43, 15 June 2017

2017-06-15T22:43:27Z

← Older revision		Revision as of 22:43, 15 June 2017
Line 1:		Line 1:
	[[Category:UserGuide]]		[[Category:UserGuide]]
			==Getting Started==
			{{UgSensorIntro\|1104\|Vibration Sensor\|Voltage Ratio Input port}}

	~~===Required Hardware===~~

	* A [{{SERVER}}/products.php?product_id=1104 1104 Vibration Sensor]		Next, you will need to connect the pieces:
	* An InterfaceKit or Hub to ~~read~~ the ~~sensor~~
	* A Phidget cable
	* A USB cable
	* A computer

	~~===Connecting the Pieces===~~
	[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]		[[Image:1104_0_Connecting_The_Hardware.jpg\|400px\|right\|link=]]
	# Connect the vibration sensor to the ~~InterfaceKit or Hub~~ with the Phidget cable.		# Connect the vibration sensor to the 1018 with the Phidget cable.
	# Connect the ~~InterfaceKit or Hub~~ to your computer with the USB cable.		# Connect the 1018 to your computer with the USB cable.

	<br clear="all">		<br clear="all">
	~~==Testing Using Windows==~~		{{UGIntroDone\|1104}}

	{{~~UgSensor~~}}		==Using the 1104==
			{{UGcontrolpanelSensor\|1104\|1018}}

			{{UGSensorVoltageRatioInput\|1104\|a value from -1 to 1}}

	==Technical Details==		==Technical Details==
			This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.
	This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

	A sensor voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.		A sensor voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.

Mparadis at 15:31, 6 June 2017

2017-06-06T15:31:08Z

← Older revision		Revision as of 15:31, 6 June 2017
Line 3:		Line 3:
	===Required Hardware===		===Required Hardware===

	* A 1104 Vibration Sensor		* A [{{SERVER}}/products.php?product_id=1104 1104 Vibration Sensor]
	* An InterfaceKit or Hub to read the sensor		* An InterfaceKit or Hub to read the sensor
	* A Phidget cable		* A Phidget cable

Mparadis: /* Technical Details */

2017-04-18T14:09:31Z

Technical Details

← Older revision		Revision as of 14:09, 18 April 2017
Line 23:		Line 23:
	This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.		This sensor buffers a piezoelectric transducer. As the transducer is displaced from the mechanical neutral axis, bending creates strain within the piezoelectric element and generates voltages. If the assembly is supported by its mounting points and left to vibrate “in free space” the device will behave as a form of vibration sensor. The sensing element should not be treated as a flexible switch, and is not intended to be bent.

	~~SensorValue 500~~ roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing ~~SensorValue~~ to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of ~~vibration~~.		A sensor voltage of 2.5V roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing the voltage to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibrations.

	{{UGasens}}		{{UGasens}}

	{{UGnext\|}}		{{UGnext\|}}

Mparadis: /* Technical Details */

2016-11-14T15:52:01Z

Technical Details

← Older revision		Revision as of 15:52, 14 November 2016
Line 24:		Line 24:

	SensorValue 500 roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing SensorValue to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibration.		SensorValue 500 roughly corresponds to 0g acceleration. Acceleration will deflect the sensing element up or down, causing SensorValue to swing either way. This sensor is not meant to measure precise acceleration and vibration - use it to detect an acceleration impulse, or the presence of vibration.

	~~{{UGotherint}}~~

	{{UGasens}}		{{UGasens}}

	{{UGnext\|}}		{{UGnext\|}}