Products for USB Sensing and Control Canada flag
Products for USB Sensing and Control

sales inquiries

quotes, distributor information, purchase orders
sales@phidgets.com

technical inquiries

support, advice, warranty, returns, misshipment
support@phidgets.com

website inquiries

corrections or suggestions
web@phidgets.com

Address

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada

PHIDGETS Inc.

Unit 1 - 6115 4 St SE
Calgary AB  T2H 2H9
Canada
+1 403 282-7335

DC Linear Actuator - 50mm - 50N

ID: 3570_0

This DC actuator has a stroke length of 50mm with a peak force of 50N and a peak speed of 32 mm/s.

$80.00

Quantity Available: 7

Qty Price
5 $76.80
10 $73.60

The Actuonix L16 series of linear actuators are compact DC motors geared to push or pull loads along the stroke of the actuator. This actuator comes with a built-in potentiometer, allowing your application to monitor the actuator's position.

The 3570 linear actuator has a stroke length of 50mm and a 35:1 gearbox. It is able to move at a rate of 32 mm/s and can exert up to 50N of force at lower speeds.

Features

  • 50mm stroke length
  • Maximum speed 32mm per second
  • Maximum force 50N
  • Connects to a Phidgets DC motor controller
  • Built-in potentiometer for position control

Comes packaged with

  • Two mounting clamps
  • Two mounting brackets
  • Two rod end options: a clevis end and a threaded end with nut
Accessories

Connection

This actuator is compatible with Phidget motor controllers and analog inputs. For more details, see the Connection & Compatibility tab.

Warning

warning

This actuator does not have built-in limit switches, so you may damage the motor or gears if you run the actuator beyond its minimum or maximum stroke. We recommend using the actuator's built-in potentiometer in your program to ensure that the motor is shut off whenever the potentiometer voltage gets close to 0V or 5V. Have a look at the "Resources" tab for a link to a project that implements a control loop using the potentiometer value.

DC Motor Controllers

You'll need a motor controller to control the position of this actuator. In order to connect this actuator to a terminal block, you'll need to cut off the 5-pin connector and strip the wires. Then, to connect it to a controller, attach the wires as follows:

Function 3570DCC1001
Motor Power Red M+
Motor Ground Black M-
Functional

If you decide to use a motor controller with an analog input, you can connect the integrated potentiometer to the input. If you use a VINT-based motor controller, you can plug the potentiometer into another one of the VINT Hub's ports. If you decide to use a stand-alone motor controller, you'll need a device with an analog input to read the potentiometer.

Product Controller Properties Electrical Properties Board Properties
Part Number Price Number of Motor Ports Velocity Resolution Acceleration Resolution Continuous Motor Current Max Controlled By
1064_1B
PhidgetMotorControl HC
$115.00 2 0.79 Duty Cycle 1.9 Duty Cycle/s (per motor) 14 A USB (Mini-USB)
1065_1B
PhidgetMotorControl 1-Motor
$75.00 1 0.39 Duty Cycle 24.5 Duty Cycle/s 5 A USB (Mini-USB)
DCC1000_0
DC Motor Phidget
$75.00 1 0.001 Duty Cycle 1 Duty Cycle/s 25 A VINT
DCC1002_0
4A DC Motor Phidget
$40.00 1 0.001 Duty Cycle 0.1 Duty Cycle/s 4 A VINT
DCC1003_0
2x DC Motor Phidget
$60.00 2 0.001 Duty Cycle 0.1 Duty Cycle/s (per motor) 4 A VINT

Phidget Cables

To easily connect the internal potentiometer to an IO board we recommend you use a Phidget cable. Just cut off the ends of one of the Phidget cables and solder them to the potrntiometer cable as described in the table below. You can solder multiple cables together in order to make even longer Phidget cables, but you should be aware of the effects of having long wires in your system.

Function 3570Phidget Cable
Potentiometer Ground Orange Black
Potentiometer Power Yellow Red
Potentiometer Wiper Purple White
Functional
Product Physical Properties
Part Number Price Cable Length
3002_0
Phidget Cable 60cm
$2.00 600 mm
3003_0
Phidget Cable 10cm
$1.50 100 mm
3004_0
Phidget Cable 350cm
$3.00 3.5 m
3038_0
Phidget Cable 120cm
$2.25 1.2 m
3039_0
Phidget Cable 180cm
$2.75 1.8 m
CBL4104_0
Phidget Cable 30cm
$1.75 300 mm
CBL4105_0
Phidget Cable 90cm
$2.00 900 mm
CBL4106_0
Phidget Cable 150cm
$2.50 1.5 m
KIT4030_0
Phidget Cable Kit
$10.00 80 mm

Product Specifications

Motor Properties
Motor Type DC Linear Actuator
Stroke Length 50 mm
Maximum Speed 32 mm/s
Peak Power Point (@ 16 mm/s) 50 N
Peak Efficiency Point (@ 24 mm/s) 24 N
Gear Ratio 35 : 1
Positional Error Max 300 μm
Electrical Properties
Rated Voltage 12 V DC
Potentiometer Impedance 9 kΩ
Physical Properties
Gear Train Material Metal
Backdrive Force 31 N
Side Force Max 40 N
Wire Length 350 mm
Weight 56 g
Operating Temperature Min -10 °C
Operating Temperature Max 50 °C
IP Rating IP54
Customs Information
Canadian HS Export Code 8501.10.00
American HTS Import Code 8501.10.40.60
Country of Origin CN (China)

Documents

If you want an actuator with different specifications you can compare them all below:

Product Motor Properties Electrical Properties Physical Properties
Part Number Price Stroke Length Maximum Speed Peak Power Point Peak Efficiency Point Gear Ratio Rated Voltage Weight
3570_0
DC Linear Actuator - 50mm - 50N
$80.00 50 mm 32 mm/s (@ 16 mm/s) 50 N (@ 24 mm/s) 24 N 35 : 1 12 V DC 56 g
3571_0
DC Linear Actuator - 100mm - 50N
$80.00 100 mm 32 mm/s (@ 16 mm/s) 50 N (@ 24 mm/s) 24 N 35 : 1 12 V DC 74 g
3572_0
DC Linear Actuator - 140mm - 50N
$80.00 140 mm 32 mm/s (@ 16 mm/s) 50 N (@ 24 mm/s) 24 N 35 : 1 12 V DC 84 g
3573_0
DC Linear Actuator - 50mm - 75N
$80.00 50 mm 20 mm/s (@ 10 mm/s) 75 N (@ 15 mm/s) 38 N 63 : 1 12 V DC 56 g
3574_0
DC Linear Actuator - 100mm - 75N
$80.00 100 mm 20 mm/s (@ 10 mm/s) 75 N (@ 15 mm/s) 38 N 63 : 1 12 V DC 74 g
3575_0
DC Linear Actuator - 140mm - 75N
$80.00 140 mm 20 mm/s (@ 10 mm/s) 75 N (@ 15 mm/s) 38 N 63 : 1 12 V DC 84 g
3576_0
DC Linear Actuator - 50mm - 175N
$80.00 50 mm 8 mm/s (@ 4 mm/s) 175 N (@ 7 mm/s) 75 N 150 : 1 12 V DC 56 g
3577_0
DC Linear Actuator - 100mm - 175N
$80.00 100 mm 8 mm/s (@ 4 mm/s) 175 N (@ 7 mm/s) 75 N 150 : 1 12 V DC 74 g
3578_0
DC Linear Actuator - 140mm - 175N
$80.00 140 mm 8 mm/s (@ 4 mm/s) 175 N (@ 7 mm/s) 75 N 150 : 1 12 V DC 84 g
DCL4013_0
DC Linear Actuator - 100mm - 60N
$40.00 100 mm 15 mm/s 60 N 12 V DC 93.9 g
DCL4014_0
DC Linear Actuator - 30mm - 60N
$40.00 30 mm 15 mm/s 60 N 12 V DC 69.9 g
DCL4015_0
DC Linear Actuator - 100mm - 18N
$40.00 100 mm 50 mm/s 18 N 12 V DC 94.3 g
DCL4016_0
DC Linear Actuator - 30mm - 18N
$40.00 30 mm 50 mm/s 18 N 12 V DC 63.6 g