Adapters

Connect a pH probe or any voltage-based probe that uses a BNC connector to your VINT port with this isolated adapter.

Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply.

Interface a quadrature encoder at speeds of up to 100,000 quadrature cycles per second to a port on your VINT Hub.

Read up to four encoders simultaneously with this Phidget. Includes 4 digital inputs for reading limit switches.

Read one encoder at speeds of up to 500,000 quadrature cycles per second. Connects directly to USB.

This adapter lets you read Sharp distance sensors with a Phidgets Analog Input or VINT Hub port.

The FlexiForce adapter allows you to connect one FlexiForce FSR to a an Analog Input or VINT Hub port.

This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just dial in the resistance you want.

The pH/ORP Adapter connects any of our pH or ORP probes to an Analog Input or VINT Hub port.

A common output mode for industrial sensors is 4-20mA. This adapter lets you use 4-20mA sensors with an Analog Input or VINT Hub port.

This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just select the resistance you want.

Phidgets mostly run on 5V, but if you need 12V to power up your sensor you can use this adapter.

Phidgets mostly run on 5v, but if you have a ±12V sensor you can use this adapter.

This convenient adapter makes your hub's 5V USB voltage accessible on a terminal block and can be switched using a Digital Output.

This adapter provides an adjustable 1.5 to 5V from your hub's USB voltage, and can be turned on and off as a Digital Output.

This adapter provides an adjustable 5 to 24V from your hub's USB voltage, and can be turned on and off as a Digital Output.